Operation Manual

550 Organization mode of operation
8.2 Parameters
... / Zero point shift (602022)
OFF The AWG does not generate a zero point shift.
ON The AWG generates a zero point shift.
... / Front chuck edge on main spindle (602018) Z position of the front edge of the chuck for calculating
the workpiece zero point.
... / Front chuck edge on opposing spindle (602019) Z position of the front edge of the chuck for calculating
the workpiece zero point.
... / Jaw width on main spindle (602020) Jaw width in Z direction for calculating the workpiece
zero point.
... / Jaw width on opposing spindle (602021) Jaw width in Z direction for calculating the workpiece
zero point.
... / Global parameters for finished parts (601900) / ...
... / Max. inward copying angle (EKW) [°] (601903) Tolerance angle for distinguishing turning from
recessing.
... / Centric predrilling (602100) / ...
... / 1st drilling diameter limit (UBD1) [mm] (602101) Limit diameter for the first predrilling step
... / 2nd drilling diameter limit (UBD2) [mm] (602102) Limit diameter for the second predrilling step
... / Point angle tolerance (SWT) [°] (602103) Permissible point angle tolerance for inclined drilling
limitation elements
... / Drilling oversize – Diameter [BAX] [mm] (602104) Machining oversize on drilling diameter in X direction.
Radius value
... / Drilling oversize – Depth [BAZ] [mm] (602105) Machining oversize on drilling depth in Z direction.
... / Traverse for predrilling (ANB) (602106) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Traverse for tool change (ABW) (602106) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Safety clearance on blank part (SAB) [mm] (602108) Safety clearance on workpiece blank
Parameters: Processing / ... Meaning