User Manual

41
MIDI Settings:
MIDI Clock Receive: This setting determines whether HeadRush Looperboard will sync to an
external MIDI clock source. Set to On to sync tempo to an external source, or set Off to disable.
MIDI Clock Source: This setting determines how HeadRush Looperboard will receive MIDI
clock messages. Tap the field and then use the encoder to select the desired source. Select
Looperboard to receive MIDI clock messages from the 5-pin MIDI Input on the rear panel. If
you have a class-compliant MIDI device connected to the USB Type-A Ports, select the
device's name to set it as the MIDI clock source.
MIDI Through: This setting determines the function of the MIDI Output. When set to On, MIDI
sent to the HeadRush Looperboard MIDI Input will be sent directly to the MIDI Output. When
set to Off, HeadRush Looperboard will only send its own MIDI information out of the MIDI
output.
Receive MIDI CC: This setting determines whether HeadRush Looperboard will respond to
incoming MIDI CC messages. When set to On, HeadRush Looperboard will receive MIDI CC
messages from an external device on the selected channel. To change the MIDI Channel, tap
the field next to the On/Off button, and then turn the encoder to select the channel, 1–16 or
Omni (all channels). When set to Off, HeadRush Looperboard ignore incoming MIDI CC
messages.