Installation Guide

28
Install Aluminum Floor Strip and optional Cap.
Install Aluminum Floor Strip to prevent water leakage.
Measure distance from Floor Bracket to Return Panel
and cut Aluminum Floor Strip to fit. Apply a small bead
of silicone under strip for waterproofing and set in
place. If Aluminum Floor Strip is cut slightly short, apply
a small bead of silicone under Aluminum Floor Strip Cap
and place on top of cut end of Aluminum Floor Strip as
close to the Return Panel as possible.
Tape aluminum strip to floor surface using masking
tape and allow to dry for 24 hours.
27
Adjust Slider Panel Stoppers.
Important: Slide door gently when
testing door stops so as not to damage
the door or the fixed panel.
Adjust location of Slider Stoppers on Shower Rod to
ensure the Slider Panel does not touch the Return
Panel and the Slider Panel Handle does not touch
the Fixed Panel.