User Manual

76
| OPERATION MANUAL
SETTING UP MōVI PRO + AERO LANDING GEAR
Items Needed
» MōVI Pro
» MōVI Pro Aero Landing Gear*
» MōVI Dock*
» 2.5mm Hex driver
*These items are not included with the MōVI Pro.
1. Attach the long carbon fiber tubes to the landing gear cross beam to assemble
the front landing gear. Use the levers to hand tighten the rods into place.
2. Place MōVI Pro on a MōVI Dock and use four M3 screws to attach the
front landing gear to the front of the MōVI Pro’s Pan arm.
3. Slide the rear landing gear into the slot underneath the GCU
from either side and secure it with two M3x8 screws.