User Manual

66
| OPERATION MANUAL
JOLT REJECTION
To help enable higher Hold Strength settings while mitigating some of the cons listed above, Jolt
Rejection can sense jolts and soften the gimbals recovery effort.
Tuning Jolt Recovery
Jolt Rejection helps prevent the MōVI Pro from overshooting its target orientation when
responding to a sudden disturbance. A higher Jolt Rejection value increases the softening of
the response; however, values that are too high can cause the MōVI Pro to react too slowly to
disturbances.
MAX CONTROL RATE
The maximum rate of camera movement can be used to enable higher Hold Strengths while
reducing the possibility of overshoot. This is especially helpful when shooting with longer focal
lengths.
Tuning Max Control Rate
1. To increase the control over the camera’s movements, increase the Max Control Rate.
2. To increase the smoothness of the camera’s movements, decrease the Max Control
Rate. This will reduce the operator’s control over the camera’s movements.
Max Roll Angle
The Max Angle Roll will set a maximum angle between the roll axis and the joint’s zero degree
angle; this can be used to create a Majestic Roll effect for the MōVI Pro.
MōVI PRO SETUP COMPLETE
Once you have adjusted the MōVI Pro’s parameters to suit your requirements,
setup is complete!