Spec Sheet

Remote 1010, 1410 series ice machine
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
7035-202005 | © Follett LLC
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency.
Agion is a registered trademark of Sciessent LLC.
HORIZON ELITE, ICE•DEVICE, ICE MANAGER, MICRO CHEWBLET, SAFECLEAN PLUS, SANISPONGE, SYMPHONY PLUS and VISION are trademarks of FollettLLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
Inlet water
temperature
F (C)
Ambient air temperature F (C)
60 (16) 70 (21) 80 (27) 90 (32) 100 (38)
lb (kg) production in 24 hr
50 F (10 C)
1474 (669) 1372 (623) 1269 (576) 1212 (550) 1154 (524)
60 F (16 C)
1385 (628) 1292 (586) 1198 (544) 1148 (521) 1097 (498)
70 F (21 C)
1296 (588) 1212 (550) 1127 (511) 1083 (492) 1039 (472)
80 F (27 C)
1239 (562) 1155 (524) 1072 (487) 1030 (468) 988 (449)
90 F (32 C)
1181 (536) 1099 (499) 1017 (462) 976 (443) 936 (425)
Inlet water
temperature
F (C)
Ambient air temperature F (C)
60 (16) 70 (21) 80 (27) 90 (32) 100 (38)
lb (kg) production in 24 hr
50 F (10 C)
1051 (477) 978 (444) 906 (411) 834 (379) 763 (346)
60 F (16 C)
1037 (471) 925 (420) 855 (388) 796 (361) 737 (335)
70 F (21 C)
937 (425) 871 (395) 805 (366) 758 (344) 711 (323)
80 F (27 C)
904 (410) 839 (381) 774 (351) 727 (330) 680 (309)
90 F (32 C)
872 (396) 807 (366) 743 (337) 696 (316) 648 (294)
Ice production – Horizon Elite 1410 series,
air-cooled models
Ice production – Horizon Elite 1010 series,
air-cooled models
Remote condensing unit
Condensing unit installation specifications
Important specifier notes
=
1. Provide front, back, top and side clearances
asshown.
2. The maximum refrigerant line run length is
100' (30.5 m). Installations require 12.5 lb for
1010/1410 single phase and 1010 three phase
and 10 lb for 1410 three phase.
3. The maximum line rise above the evaporator is
35' (10.7 m). Condensing unit above evaporator
unit – 35'(10.7m) (installations with rise over
20' (6.1 m) require additional suction line s-trap
at midpoint rise).
4. The evaporator can only be mounted a maximum
of 15' (4.6 m) above the condensing unit.
Note: The service loop is not included when
calculating length, rise or drop in the tubingrun.
Note: To connect evaporator/ice machine to rack systems, see page 3.
48.00"
(121.9 cm)
24.00"
(61.0 cm)
48.00"
(121.9 cm)
24.00"
(61.0 cm)
36.00" (91.4 cm)
height clearance
air in
exhaust