Spec Sheet

ManualsBrandsFollett ManualsCommercial Equipment23" Horizon Elite Series Remote Condenser Ice Machine with 978 lbs. Daily Ice Production, RIDE Technology, Chewblet Ice, and Agion Silver-Based Antimicrobial in Stainless Steel

Horizon Elite

™

remote 1010, 1410 series Chewblet

ice machine

Model conﬁgurations

For use with ¹ Install/mount Condenser V/Hz/Ph

Item number

1010 series

Item number

1410 series

ice storage bin

top mount

with 115/60/1

HCD1010RBT HCD1410RBT

without 115/60/1 HCD1010NBT HCD1410NBT

RIDE

with 115/60/1

HCD1010RBS HCD1410RBS

without 115/60/1 HCD1010NBS HCD1410NBS

Follett Vision

™

undercounter

ice and beverage

dispenser

RIDE

with 115/60/1

HCD1010RVS HCD1410RVS

without 115/60/1 HCD1010NVS HCD1410NVS

Cornelius PR150

undercounter ice

and beverage

dispenser

RIDE

with 115/60/1

HCD1010RPS HCD1410RPS

without 115/60/1 HCD1010NPS HCD1410NPS

countertop ice

and beverage

dispenser

(by others)

top mount

with 115/60/1

HCD1010RHT HCD1410RHT

without 115/60/1 HCD1010NHT HCD1410NHT

RIDE

with 115/60/1

HCD1010RHS HCD1410RHS

without 115/60/1 HCD1010NHS HCD1410NHS

drop-in

dispenser

(by others)

RIDE

with 115/60/1

HCD1010RJS HCD1410RJS

without 115/60/1 HCD1010NJS HCD1410NJS

Ice Manager

diverter

valve system

RIDE

with 115/60/1

HCD1010RMS HCD1410RMS

without 115/60/1 HCD1010NMS HCD1410NMS

Ordered separately

Not compatible with Micro Chewblet ice

Requires top kit (see page 5 for part number)

For three phase remote condensing unit, replace third character (D) with F

e.g. HCF1010RBT

For Micro Chewblet ice, replace second character (C) with an M

e.g. HMD1010RBT

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Job

Item

Independent third party studies. Contact Follett for details.

Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.

Features

Horizon Elite

1010 series - up to 978 lb (444 kg) in 24 hours

1410 series - up to 1372 lb (623 kg) in 24 hours

- automatically transport ice through a tube with RIDE

technology from up to 75' (22.9 m) away

- chewable, compressed nugget ice is preferred overcubes¹

- ice dispenses reliably from ice and beveragedispensers

- available with approximately 1.00" (2.54 cm) long

standard Chewblet ice or optional 3/8" (0.95 cm) long

Micro Chewblet

™

ice

- quiet production without noisy harvest cycles

Revolutionary, scale inhibiting design

- produces ice that has 15% the TDS of the incoming water

for optimum dispensing and long life in drinks

- quarantines and regularly expels scale producing

dissolved solids to dramatically reduce scalebuildup

- increases time between descaling and reduces or

eliminates the need for expensive scale treatment

- saves 35% water compared to comparable cubers

- three phase HCF1010 models ENERGY STAR

certiﬁed

Durable, attractive ice machine

- regular bearing inspection or replacement is notrequired

- upgraded, easy-to-read LED operating status and

diagnosticdisplay

Designed with sanitation in mind

- Agion® silver-based antimicrobial product protection of

key ice and water contact components²

- ﬂoatless, sealed design inhibits formation of bioﬁlms

- semi-automatic cleaning and sanitizing system

Warranty

- 3 years parts and labor, 5 years compressor parts

Certiﬁcations

Short form speciﬁcation:

Ice machine to be a Follett

Horizon Elite ice machine model

______________ [Insert size/series,condenser type and installation/mount-

ing, from model number guide] capable of producing compressed nugget

ice using an ecient, sanitary horizontal evaporator/auger system and

delivering ice by a ﬂexible wire reinforced transport tube to

ice storage bin, ice and water dispenser, ice and beverage dispenser,

drop-in dispenser or Ice Manager

™

diverter valve system, slide-out

evaporator with utility docking station, front-mounted unit status display,

evaporator water inlet at harvest end with automatic ﬂush while producing

ice, and semi-automatic cleaning and sanitizing system, plus all the features

listed below and mounting/performance-enhancing accessories checked.

Summary of content (8 pages)

PAGE 1
Horizon Elite™ remote 1010, 1410 series Chewblet® ice machine Short form specification: Features Horizon Elite 1010 series - up to 978 lb (444 kg) in 24 hours 1410 series - up to 1372 lb (623 kg) in 24 hours - automatically transport ice through a tube with RIDE® technology from up to 75' (22.9 m) away - chewable, compressed nugget ice is preferred over cubes¹ - ice dispenses reliably from ice and beverage dispensers - available with approximately 1.00" (2.
PAGE 2
Accessories Top kit for ice and beverage dispensers (page 5) Dimensional drawing D1 Water filters (refer to form# 9905) W1 C1 Wall mount bracket (item# 00997098 ) L2 Ice machine stand, height-adjustable (item# 00997080) G L1 Timer to control one or two ice machines (item# 00967625) Longer ice transport tube, specify length: ___ ft/m in 5'/1.
PAGE 3
Dimensional drawing 1410 three phase 1010/1410 single phase 1010 three phase D1 D1 W1 H1 W1 H1 Specification, condenser unit Horizon Elite 1010 series Horizon Elite 1410 series W1 Width 36.25" (91.4 cm) – all models D1 Depth 25.50" (64.8 cm) – all models H1 Height 26.10" (66.
PAGE 4
1 – Locating the ice machine Horizon Elite remote Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up to 75' (22.9 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications) require special attention to service access, unit ventilation and ice tube runs (see pages 5-7).
PAGE 5
1 – Locating the ice machine (continued) Top mounting – compatible ice and beverage dispensers 1 Model Number Width in (cm) Depth 2 in (cm) Height 3 in (cm) Top kit Freestyle 7000 30.10 (76.5) 33.11 (79.0) 47.00 (119.4) H22F30-F 4, 5 Freestyle 9000 25.50 (64.8) 35.50 (90.2) 73.75 (187.3) H22F24-F 4, 6 Freestyle 9100 25.50 (64.8) 39.25 (99.7) 77.25 (196.2) H22F26-F 4 DB/ED/DF 200 series 30.00 (76.2) 30.00 (76.2) 34.38 (87.3) H22C30-F DB/ED/DF 250 series 30.00 (76.2) 30.00 (76.
PAGE 6
2 – Undercounter/in-cabinet mounting Cabinet details Important specifier notes minimum 1/4" per foot (2 cm per meter) Ice transport tube pitch toward ice machine 1. Cabinet door opening must meet minimum size requirements shown and be free of obstructions to allow ice machine to slide out (no lip or utilities to block removal). secure to prevent dips and traps from forming 2. Cabinet base must be capable of supporting ice machine and allow ice machine to rest flat on cabinet bottom. 3.
PAGE 7
4 – Horizon Elite drain - specifier guidelines Important specifier notes: Where code allows, follow recommendation below. Flush drain plumbing – For regular machine drainage 1. Connect the silicone tubing to the ice machine 3/4" drain barb ➊. ➊ 2. Assemble the 3/4" barb x 3/4" FPT to the 3/4" MPT x 1" slip. Connect the other end of the silicone tubing to the 3/4" barb ➋. Minimum 8" radius 2 ft x 1" OD silicone tubing 3. Connect the 1" slip fitting to the 1" stand pipe/drain ➌.
PAGE 8
Remote condensing unit Condensing unit installation specifications Important specifier notes 1. Provide front, back, top and side clearances as shown. 2. The maximum refrigerant line run length is 100' (30.5 m). Installations require 12.5 lb for 1010/1410 single phase and 1010 three phase and 10 lb for 1410 three phase. 36.00" (91.4 cm) height clearance 3. The maximum line rise above the evaporator is 35' (10.7 m). Condensing unit above evaporator unit – 35' (10.7 m) (installations with rise over 20' (6.