User Guide

13
WASH MODIFIERS (SOME MODELS ONLY)
DD*C MODELS:
If sanitization has been successful:
●
The dishwasher will beep
●
0 will show in the display
●
The sanitize indicator will remain lit.
●
After 30 seconds the display will turn off.
If sanitization has not been successful:
●
An alert will sound
●
An alert code will show in the display
●
The sanitize indicator will not be lit.
●
Check if the water supply has been turned
off or the wash program interrupted.
●
Press once to stop the beeping and
then again to clear the alert code, then run
the sanitize cycle again.
See also section ‘How to attend to a fault’.
DD*D AND DD*I MODELS:
If sanitization has been successful:
●
The wash will finish as normal.
If sanitization has not been successful:
●
An alert will sound
●
When the drawer is opened the sanitize indicator will flash.
●
Check if the water supply has been turned off or the wash program interrupted.
●
Press and hold once to stop the beeping and a second time to clear the flashing alert
code.
●
Reset sanitize and then run the cycle again.
●
See also section ‘How to attend to a fault’