Data Sheet

X-2017, www.findernet.com
H
Functions
U = Supply
voltage
= Output
contact
LED
Supply
voltage
NO
(SPDT-NO)
output contact
Contacts
Open Closed
OFF Open x1 - x4 x1 - x2
ON Open x1 - x4 x1 - x2
ON
Open
(Timing in Progress)
x1 - x4 x1 - x2
ON Closed x1 - x2 x1 - x4
Wiring diagram Type: 85.02, 85.03, 85.04
85.02
85.03
85.04
(AI) On-delay.
Apply power to timer.
Output contacts transfer after preset time has elapsed.
Reset occurs when power is removed.
(DI) Interval.
Apply power to timer.
Output contacts transfer immediately.
After the preset time has elapsed, contacts reset.
(GI) Pulse delayed.
Apply power to timer. Output contacts transfer after
preset time has elapsed. Reset occurs after a fixed time
of 0.5s.
(SW) Symmetrical flasher (starting pulse on).
Apply power to timer.
Output contacts transfer immediately and cycle
between ON and OFF for as long as power is applied.
The ratio is 1:1 (time on= time off).
U = Supply voltage
S = Signal switch
U
c
= Supply voltage
to the timer
11-14 = Self-holding
contact
= Output contact
Signal ON Pulse
On mometary closure of Signal Switch (S) >50ms,
the output contacts transfer and remain so (with self-
holding on contact 11-14) for the duration of the preset
delay, after which they reset.
5
85
SERIES
85 SERIES
Miniature plug-in timers 7- 10A