Administrator Guide

Client Ports
Unisphere Central clients use the following ports:
Inbound Ports
Unisphere Central does not use any inbound ports.
Outbound Ports
Unisphere Central initiates connections to the following port:
Port Protocol Name Purpose
3033 TCP Web Server Port Communicating with the Storage Manager Data Collector
Server Agent Ports
The following tables list the ports used by the Storage Manager Server Agent.
Inbound Server Agent Port
The Server Agent accepts connections on the following port.
Port
Protocol Name Purpose
27355 TCP Server Agent Socket Listening Port Receiving communication from the Data
Collector
Outbound Server Agent Port
The Server Agent initiates connections to the following port.
Port
Protocol Name Purpose
8080 TCP Legacy Web Services Port Communicating with the Data Collector
IPv6 Support
The Storage Manager Data Collector can use IPv6 to accept connections from Unisphere and to communicate with managed
Storage Center SANs.
To use IPv6, assign IPv6 addresses as described in the following table.
IPv6 Connection
Requirements
Unisphere to Data Collector
● Unisphere computer must have an IPv6 address.
● Data Collector server must have both an IPv4 address and
an IPv6 address.
Data Collector to Storage Center
● Data Collector server must have both an IPv4 address and
an IPv6 address.
● Storage Center SAN must have both an IPv4 address and
an IPv6 address on the management interface.
Unisphere Overview 17