Owners Manual
Table Of Contents
- Latitude 12 Rugged Extreme Tablet – 7212 Owner's Manual
- Contents
- Working on your computer
- Removing and installing components
- Recommended tools
- Screw size list
- Battery
- Installing the battery when the cross strap is attached - Optional
- Subscriber Identification Module (SIM) card
- Display assembly
- Stylus
- WLAN card
- WWAN card
- CMOS battery
- Power button assembly
- Micro serial port and power connector port
- Front camera
- Microphone
- Heat sink for SSD
- PCIe Solid State Drive (SSD)
- System fan
- System Board
- Docking Board
- Back Camera
- Smartcard holder
- Bottom base assembly
- Technology and components
- Software
- System specifications
- Product overview
- Power and battery-status light
- System specifications
- Processor specifications
- Memory specifications
- Storage specifications
- Audio specifications
- Video specifications
- Camera specifications
- Communication specifications
- Port and connector specifications
- Display specifications
- Touch specifications
- Adapter specifications
- Physical dimension specifications
- Environmental specifications
- System setup
- Boot Sequence
- Navigation keys
- System Setup overview
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot
- Intel software Guard Extensions
- Performance screen options
- Power Management
- POST Behavior
- Manageability
- Virtualization Support options
- Wireless options
- Maintenance
- System Log
- Support Assist System Resolution
- Troubleshooting
- Ecosystem Accessories
The battery is released from the battery bay.
5. Lift the edge of the battery that pops up to release the battery.
Installing the battery
1. Insert the battery into the battery slot.
NOTE: Ensure the metal pin of the battery is aligned in place.
2. Slide the battery into the slot until it clicks into place.
3. Make sure the battery latch is back to the locked state.
NOTE: There are two battery. Perform steps 1 to 3 to install battery 1 and battery 2 on the tablet.
4. Follow the procedure in After working inside your computer.
Removing and installing components
13