Concept Pro VA-KBDPRO+ 3 Axis PTZ / DVR control keyboard User Manual
Contents Key features Example System configuration Operation modes Getting started Programming the keyboard Matrix setup DVR setup Camera Setup Key buzzer Key ID Key level Monitor range Camera range DVR range Change default password Reset factory defaults Keyboard operation CAM mode DVR mode DVR / AI mode 1 1 2 2 3 3 4 5 5 5 5 5 5 5 5 6 7 7
Key features Flexible configuration The VA-KBDPRO+ supports multiple telemetry protocols for compatibility with a wide range of PTZ devices.
Operation modes Getting started The VA-KBDPRO+ has 3 operating modes which are used depending on the system configuration Please note: all necessary connections must be made before applying power to the VA-KBDPRO+ 1. CAM mode In CAM mode, the VA-KBDPRO+ functions as a standard PTZ telemetry controller. The operator can select individual telemetry devices to control and can also access all features of those telemetry devices, such as presets, patterns, groups and menu setup.
Programming the keyboard DVR setup SET BAUDRATE To access the keyboard setup, press the MENU key – the keyboard will prompt for a password PASSWORD: ********** Enter the keyboard setup menu and use the joystick to highlight SET DVR. The cursor flashes next to SET_BAUDRATE Enter the default password of 9876543210 and press ENTER. The setup menu is displayed SET DVR: >SET_BAUDRATE> SET MATRIX: >SET_PROTOCOL> Press ENTER and then twist the joystick left / right to select the required baudrate.
Camera setup SET PROTOCOL Camera setup SET BAUDRATE Enter the keyboard setup menu and use the joystick to highlight SET CAMERA. The cursor flashes next to SET_PROTOCOL Enter the keyboard setup menu and use the joystick to highlight SET CAMERA. The cursor flashes next to SET_PROTOCOL.
Key Buzzer Set camera range The VA-KBDPRO+ has an internal key press buzzer which can be enabled or disabled as required. Enter the keyboard setup menu and use the joystick to highlight KEY BUZZER. The cursor flashes next to ENABLE BEEP Enter the keyboard setup menu and use the joystick to highlight SET CAM RANGE.
Keyboard operation CAM mode Using the speed dome setup menu Please note that all the operation examples given here are for the Concept Pro VHSD-8XX series of speed domes. For any other type of PTZ equipment, reference should be made to its user manual for the appropriate command sequences. To enter the speed dome menu, press PRESET – 95 – ENTER To choose a menu item or change settings within a menu item, move the joystick up / down To place the keyboard in to CAM mode, press the CAM button.
Keyboard operation DVR mode Keyboard operation DVR / AI mode Please note that this keyboard can only control the Concept Pro VXM4 range of DVRs Please note that this keyboard can only control the Concept Pro VXM4 range of DVRs. To place the keyboard in to DVR mode, press the DVR button repeatedly until only the yellow DVR LED is lit In DVR/AI mode only individual channels can be selected full screen.
