Install guide

Item Sub Item Description
Capture -
Captures and saves the current image as a still picture.
The image is saved as jpeg file in the following folder: C:₩xNetCapture
Setting -
Brings up Menu screen.
Setup page for each XNET feature can be opened from this Menu screen.
Please refer to [XNET Owner’s Manual] for detail.
Motion -
Opens up Motion Detection page.
You can add or delete areas for detecting motion in this page.
Please refer to [XNET Owner’s Manual] for detail.
Multi View -
Opens up Multi View page.
You can view videos from cameras that are programmed in Multi Video
Player setup page.
Please refer to [XNET Owner’s Manual] for detail.
Main Stream When this box is checked, Main Stream Video is displayed.
Live View
When this box is checked, Sub Stream Video is displayed.
Dual-Codec needs to be enabled in Video Setup Page in order for Sub
Stream to be displayed.
Sub Stream
Please refer to [XNET Owner’s Manual] for detail.
5.Specification
IDP4030VR/IVP4030VR Specifications
Signal System Progressive Image processing
Scanning System 4:3 Progressive
Pixel Clock 48 MHz
Scanning Frequency (H) 26 KHz(NTSC) / 27 KHz (PAL)
Scanning Frequency (V) 24 Hz (NTSC) / 25 Hz(PAL)
Image Sensor Progressive CMOS Sensor
Sync. System Internal
Total Pixel Number 2103 (H) X 1559 (V)
Effective Pixel Number 1280 (H) X 960 (V)
Horizontal Resolution 800 TV Lines
Video Output Level Select NTSC/PAL 1.0Vp.p (BNC 75, composite) * VGA/CIF Mode Only
Lens(Mega-Pixel) Built-in DC Iris Vari-focal Lens, f=3 ~ 9mm, F 1.2
Min. Illumination 1 Lux, 0 Lux(IR LED)
Camera
IR LED IR On(3 Lux) / IR Off(7 Lux)