Install guide

2
2
.
.
3
3
.
.
2
2
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
n
n
g
g
C
C
a
a
b
b
l
l
e
e
s
s
Power
Supplies Power to the Xnet product. Use 12V DC Adapter in the package.
Do not use this connector when powering up the product through LAN
cable. (PoE) The product is not covered under warranty when it is
damaged by connecting both Ethernet power and 12V DC power to this
terminal.
To 12VDC Power Adapter
Analog Video Output
Use this output to monitor the analog video signal while installing.
(Select Video Out at menu screen to enable this output)
- Alarm Sensor In (+)
- Alarm Sensor In (-)
- Alarm Output
- Alarm Output COMMMON
Alarm Terminal
Audio Connection Terminal
- MIC/ Line In)
- GND
- Line Out
- GND
Audio Connection
MIC/Line In (Mono)
Connects to auxiliary Audio Device or microphone.
Line Out (mono)
Audio signal output to a Power Amplified device or Speaker. This can be used to listen to the audio
signal sent from a remote PC for Bi-directional Audio communication.
ALARM IN/OUT
Connect to Alarm Input and Output
 Sensor Input : Wires from various sensor type (IR, heat, and magnetic) can be connected.
 Relay Output : Connect to an external Alarm device that operates by a relay such as Siren
Lamp or Alarm Light.
 Please refer to “2.3.3 Connecting to Alarm devices” for Sensor and Relay connection.