Manual

XNET Network Dome Camera Installation Manual
10 / 16
3.1.2. Cable Connection
1. A PC or a laptop computer is required to set up an IP address.
 Compatible operating system: Windows 2000/ XP/ Vista / 7
 Connect to network camera using IP installer. (ref. 3.2.)
2. Connect LAN cable to the Network Terminal of the product. (Use a crossover cable when
connecting it directly to a PC, and use a direct cable when connecting it to a HUB)
Figure 3-2.
3. Connect the camera to the power.
4. Use the Alarm Sensor/ output and audio terminal if necessary.