Ver. 1.
XNET Network Dome Camera Installation Manual About this Manual A compatibility and durability test ensured this product’s high performance. This manual is for XNET Network Dome Camera users only, and it describes operations related to XNET Network Dome Camera. Please read this manual thoroughly paying attention to cautions and warnings before using the product even if you have used similar products before. Important Notices z z z z z z z The copyright of this manual is owned by CNB Technology Inc.
XNET Network Dome Camera Installation Manual Index 1. 2. 3. 4. 5. About XNET.......................................................................................................................4 1.1. About XNET .............................................................................................................4 1.2. Feature of XNET ......................................................................................................4 1.3. Applications.......................................
XNET Network Dome Camera Installation Manual 1. About XNET 1.1. About XNET XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compressor Codec such as MJPEG and MPEG-4 XNET provides stable real-time surveillance by real time video/ audio at D1 level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices. 1.2.
XNET Network Dome Camera Installation Manual 2. About the Product 2.1. Contents Please make sure the following contents are included when you open the package. Contents Description Add. Info. XNET XNET Network Camera Power Adapter, AC Power Cable 2 Jack Cable, Input : 100-240AC 50-60Hz Output : 12DVC 2A Terminal Terminal for Alarm In / Out and Audio CD Software and user’s manual Table 2-1. 2.2.
XNET Network Dome Camera Installation Manual 2.3. Hardware Designation 2.3.1. Switch and Controls This shows Camera module inside the dome cover. Figure 2-1. z Factory Reset Press and hold for more than 5 seconds while power is on to recall factory default settings. 2.3.2. Connecting Cables z Power Supplies Power to the XNET product. Use 12V DC Adapter in the package. Figure 2-2. Do not use this connector when powering up the product through LAN cable.
XNET Network Dome Camera Installation Manual z Analog Video Output Use this output to monitor the analog video signal while installing. (Select Video Out at menu screen to enable this output) z Audio Connection MIC / Line Input (mono) : Connect to auxiliary Audio Device or microphone. Line Output (mono) : Audio signal output to a Power Amplified device or Speaker.
XNET Network Dome Camera Installation Manual 2.3.3. Connecting to Alarm Devices z Alarm Input Wires from various sensor type (IR, heat, and magnetic) can be connected to Alarm in (+)/ (-) terminal as shown in figure 2.5. (NC or NO of sensor input can be selected at Menu screen.) Alarm Sensor device requires a separate power source. z Figure 2-4. Alarm Output This terminal can only be connected up to AC 30V/400mA or DC 30V/400mA.
XNET Network Dome Camera Installation Manual 3. Software Installation This section provides brief guidelines to install the XNET quickly and to monitor XNET’s Video and Audio signals easily. If you have questions about details not explained in this section or if the product is not functioning as described, please refer to FAQ before contacting the store. Our homepage is http://www.cnbtec.com. 3.1. Installing XNET 3.1.1. Installation Mount the Camera to a ceiling or a wall.
XNET Network Dome Camera Installation Manual 3.1.2. Cable Connection 1. A PC or a laptop computer is required to set up an IP address. Compatible operating system: Windows 2000/ XP/ Vista / 7 Connect to network camera using IP installer. (ref. 3.2.) 2. 3. 4. Connect LAN cable to the Network Terminal of the product. (Use a crossover cable when connecting it directly to a PC, and use a direct cable when connecting it to a HUB) Figure 3-2. Connect the camera to the power.
XNET Network Dome Camera Installation Manual 3.2. Installing IP Installer Software and Configuring IP Address 3.2.1. About IP Installer A unique IP address has to be configured in order to connect network camera and monitoring PC to a network. IP-Installer software provided in the Installation CD (included in the package and also available to download from our website http://www.cnbtec.com) will configure IP address easily.
XNET Network Dome Camera Installation Manual 3. When you enter the IP address and click [Set] button, the box shown in Figure 3-5 will appear. Figure 3-5. 4. Select the adapter and click [Select] button to change the IP address of the camera.
XNET Network Dome Camera Installation Manual 4. Using Web Viewer Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This guide explains about using internet web browser only. For instructions on how to configure network connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the installation CD. 4.1. Logging In Enter the IP address of the device on the address bar of your web browser and press enter key.
XNET Network Dome Camera Installation Manual 4.2. Web Viewer Page Web viewer page consists of Video monitor screen and menu option buttons. Figure 4-2. Item Capture Setting Live View Sub Item Description Captures and saves the current image as a still picture. The image is saved as BMP file in the following folder: (My) Document₩XNetCapture Brings up Menu screen. Setup page for each XNET feature can be opened from this Menu screen. Please refer to [XNET Owner’s Manual] for detail.
XNET Network Dome Camera Installation Manual 5.
XNET Network Dome Camera Installation Manual Network Security Alarm and Event Management LAN Interface Support PoE Access Level Setup Network Security Motion Detection Sensor Detection After Event Process Browser Language Support Applications Monitoring Application Maintenance Mechanical System Upgrade Operating Temperature Power Dimensions Ethernet 10/100 Base-T with RJ-45 Type Standard IEEE 802.
