Manual

4 Installation and Start-up
18
After a successful start-up the display changes (Figure 9) and the status indicator on the
keyboard panel turns green.
NucleoCounter
NucleoCounterNucleoCounter
NucleoCounter
Ready
ReadyReady
Ready
Figure
Figure Figure
Figure 9
99
9.
. .
. The NucleoCounter is ready for cell counting
If the instrument has performed as described above, it is ready for use. If the
instrument displays an error message at start-up please refer to chapter 7.
4.1.2 Shutting down
Pressing the “On/Off” button shuts down the NucleoCounter and while the instrument
shuts down, the display will momentarily look as shown in Figure 10.
Bye. . .
Bye. . .Bye. . .
Bye. . .
Figure
Figure Figure
Figure 10
1010
10.
. .
. The shutdown display .
4.2 Installation of NucleoView
Regarding installation of the optional NucleoView PC-software, please refer to the
NucleoView User’s Guide.