User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 109
53-1002949-01
IP discovery profiles
4
Editing CIDR subnet addresses
To edit the CIDR subnet address (IPv4 and IPv6) range, complete the following steps.
1. Change the IP address in the IP Address field.
2. Change the number of subnet mask bits in the Subnet Mask Bits field.
For IPv4, the number of subnet mask bits is from 0 through 32.
For IPv6, the number of subnet mask bits is from 0 through 128.
3. To finish editing the address ranges, return to “Editing address ranges” on page 108.
Editing subnet addresses
To edit the subnet address (IPv4 only) range, complete the following steps.
1. Change the IP address in the IP Address field.
2. Change the subnet mask in the Subnet Mask field.
3. To finish editing the address ranges, return to “Editing address ranges” on page 108.
Editing IP addresses
To edit the IP address range (IPv4 and IPv6), complete the following steps.
1. Change the first IP address in the range in the first IP Address field.
2. Change the last IP address in the range in the second IP Address field.
3. To finish editing the address ranges, return to “Editing address ranges” on page 108.
Scheduling discovery
You can create multiple schedules (to a maximum of 32) for each profile. When it is time for a
schedule to run, discovery handles schedules in the following manner:
• If discovery is already running for the profile, the scheduled discovery drops.
• If discovery is already running for a different profile, the scheduled discovery is queued. Once
all discovery jobs in the queue finish, the scheduled discovery runs.
• If no discovery is running, the scheduled discovery starts.
To schedule a discovery profile, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab