Display Controller User Guide Windows 7 and Windows 8.
Barco nv President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.barco.
Table of contents TABLE OF CONTENTS 1. Welcome! .......................................................................................... 3 1.1 1.2 About the product .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 3 What’s in the box. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 3 2. Display Controller installation ....
Table of contents 2 K5905271 DISPLAY CONTROLLER 11/09/2014
1. Welcome! 1. WELCOME! 1.1 About the product Display Controller Thank you for choosing this Barco Display Controller! Barco’s state-of-the-art Display Controllers deliver the performance, quality and stability required for today’s advanced medical imaging applications. The powerful boards ensure ultra-fast and smooth image loading, roaming and manipulation of images in every resolution. Use the instructions in this guide to install your Barco Display Controller. 1.
1.
2. Display Controller installation 2. DISPLAY CONTROLLER INSTALLATION 2.1 Which Display Controller ? Display Controller range Your Barco medical display is compatible with a large range of Barco and non-Barco Display Controller boards. Depending on the order details, the display can be delivered with or without a Display Controller. If you are installing a Barco Display Controller, please follow the installation instructions in this section.
2. Display Controller installation Which PCIe slot to use The table above lists the various Display Controller model(s) available for your Barco Display System and the recommended PCIe slot to use for optimum performance. The figure below shows the different types of PCIe slots that can be used. 1 2 3 Image 2-1 Examples of PCIe slots 2.
2. Display Controller installation 1 Image 2-2 Power connection for the MXRT-7400 & MXRT-7500 controllers 1 6-pin graphics controller power cable 9. Screw in or firmly fasten the Display Controller. Replace and secure the computer cover. 2.4 Connecting your Barco Displays For a detailed description of the display installation and signal connection, please refer to the Display User Guide.
2.
3. Dongles 3. DONGLES Barco dongles are specially designed to allow Barco Display Controllers with a DisplayPort output to be connected with a display with DVI input. If video cable conversion is not required, you may bypass this section. 3.1 Passive Single-Link Dongle Passive Single-Link The passive Single-Link Dongle allows you to connect a display’s DVI input to the DisplayPort output of your Barco Display Controller. It is compatible with all Barco grayscale displays and up to 2MP color models.
3. Dongles 3.3 Dual-Link Dongle Dual-Link The active Dual-Link Dongle also converts DisplayPort input signals to DVI output signals. However, unlike the passive Single-Link dongle, the Dual-Link dongle allows higher resolutions (greater than 1920x1200) on color displays. WARNING: A Dual-Link DVI cable must be used to connect your display’s DVI connector with the DVI connector on the Dual-Link Dongle. The Dual-Link dongle is ordered separately.
3. Dongles 1 3 2 4 Image 3-3 Dual-Link Dongle installation 3.
3.
3.
3.
3.
3. Dongles 5 5 4 1 2 3 Image 3-12 DisplayPort Navigation display and all Grayscale or 2MP Color Diagnostic displays (see Tip) 1 DisplayPort #1 2 DisplayPort connection with single-link dongle 3 DVI-I 4 Color Navigation display 5 Grayscale Diagnostic display or 2MP Color Diagnostic display Diagnostic displays must have matching resolutions.
3.
3. Dongles MXRT-7500 2 2 3 4 1 Image 3-15 DVI Navigation display and Dual-head DVI Grayscale displays with an optional DisplayPort 3D display (see Tip). 1 DisplayPort #1 through #4 2 Grayscale Diagnostic display (DVI) 3 3D Display (DP): this is optional 4 Color Navigation display The Grayscale Diagnostic displays must have matching resolutions.
3.
3. Dongles 3 4 5 2 2 1 Image 3-17 DisplayPort Navigation display and DVI 6MP Color Diagnostic display or 3MP Color displays with an optional third DVI display 20 1 DisplayPort #1 through #4 2 USB power to computer 3 6MP Color Diagnostic display or 2 x 3MP Color Diagnostic DVI (e.g.
3. Dongles 3 2 4 1 Image 3-18 DisplayPort Navigation display and DisplayPort 6MP Color Diagnostic display or 3MP Color displays with an optional DVI 3D display 1 DisplayPort #1 through #4 2 Color Navigation DP display (e.g. MDRC-2124) 3 6MP Color Diagnostic display or 2 x 3MP Color Diagnostic DP display (e.g.
3.
4. Driver and software installation 4. DRIVER AND SOFTWARE INSTALLATION 4.1 Driver and software installation prerequisites Prerequisites To install or remove the drivers, software, or documentation you must be logged on as a user with administrator privileges. Your operating system must be installed and running before you can install the driver, software and documentation for the Barco Display Controller(s) for your Barco Display System.
4. Driver and software installation • • • After you have installed the Barco Display Controller(s) for your Barco Display System in your system for the first time. After you have reinstalled or upgraded your operating system. When you upgrade to a newer version of the MXRT driver and software. You do not need to manually uninstall an existing driver before updating to the current version.
4. Driver and software installation - - MXRT driver(s) BarcoMed Self Exam: Barco diagnostic tool QAWebAgent: Barco calibration software2 SingleView: This application is required to configure Barco Fusion displays into SingleView mode or back into DualView mode. In SingleView, the display has a single landscape resolution, and in DualView, it has two side-by-side portrait resolutions. Conference CloneView: An application that allows the user to clone 1 or 2 displays to a third display, such as a projector.
4. Driver and software installation Image 4-2 Verifying driver installation Automatic display configuration Once the drivers, software and documentation have been installed and your system has been rebooted, the computer should automatically detect your Barco displays and attach them to the desktop with the correct resolution. If the computer fails to detect your Barco displays or fails to attach them to the desktop correctly, please use the Windows Screen Resolution to set the correct resolution.
4. Driver and software installation Image 4-3 Windows 7 Add/Remove Programs When uninstalling the Barco MXRT drivers, the following dialog box will appear. Select the driver listed you wish to install (driver version may be different than what is pictured below). Image 4-4 Barco MXRT Driver Removal Wizard Driver Cleaner The Barco Driver Cleaner is a tool that will remove all Barco software components from your workstation. The application and its user guide can be found at C:\program files\Barco.
4. Driver and software installation 4.4 Silent installation of drivers and software Pre-installation Once a Barco driver has been pre-loaded into the driver store of a Windows 7 OS, subsequent installation of the driver will be intervention-free. To pre-load the driver software into the driver store, open a command shell and navigate to the appropriate driver directory and run the PnPUtil application with the -a "add" parameter. For example: cd d:\Barco\drivers\VS32\MXRT pnputil -a *.
4. Driver and software installation • • If set to Yes, QAWeb will auto-start. If No (default), scripts will prevent QAWeb from launching until after the reboot. NeverForceUninstall: • • If set to Yes, the installer will not require the user to uninstall previous Barco drivers. If No (default), the installer prompts the user to uninstall pre-existing drivers.
4.
5. Configuring Windows 5. CONFIGURING WINDOWS 5.1 Configuring SingleView How to configure SingleView 1. From the Start Menu, select All Programs. 2. Under the Barco Programs folder, select the desired configuration: Image 5-1 SingleView Start Menu options When your Fusion display is configured in SingleView mode, it is possible that the left and right sides of the image are not in the correct order.
5. Configuring Windows 2. Select a Display. 3. In the Orientation drop down list, these options are available: - Landscape (no rotation) - Portrait (rotate 90 degrees) - Landscape (flipped) - Portrait (flipped) 4. Select the desired setting, and click Apply.
6. Conference CloneView 6. CONFERENCE CLONEVIEW 6.1 What is Conference CloneView ? Overview This application allows the user to clone outputs from 1 or 2 displays to a third display or projector attached to the same Display Controller. The cloned image will be scaled to fit the resolution of the target display. The application supports zooming and panning for ease of viewing.
6. Conference CloneView Image 6-1 Conference CloneView configuration window 6.3 Notification icon System tray The Conference CloneView notification icon is available in the system tray once the Conference CloneView application has been launched. Right clicking on the icon offers the following menu options: 1 Image 6-2 Conference CloneView notification icon 1 • • • • 34 Notification icon Show GUI: This launches the configuration window.
6. Conference CloneView 6.4 Tools available on the cloned display When the mouse cursor is over to the cloned image, it will change to a different shape and the following control options are available: Zooming and panning The user can zoom in on the cloned image by rolling the mouse cursor wheel. When zoomed in, the cloned image may be bigger than the clone display and part of the image may be off screen.
6.
7. Important information 7. IMPORTANT INFORMATION 7.1 Safety information General recommendations Read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use. Electrical Shock or Fire Hazard To prevent electric shock or fire hazard, do not remove cover. No serviceable parts inside.
7. Important information Turkey RoHS compliance Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.
7. Important information 7.3 Regulatory compliance information FCC class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
7. Important information Indicates the device is approved according to the VCCI regulations Indicates the device is approved according to the KC regulations Indicates the device is approved according to the BSMI regulations Indicates the USB connectors on the device Indicates the DisplayPort connectors on the device Indicates the manufacturing date Indicates the temperature limitations3 for the device to safely operate within specs Indicates the device serial no.
7. Important information 7.5 Legal disclaimer Disclaimer notice Although every attempt has been made to achieve technical accuracy in this document, we assume no responsibility for errors that may be found. Our goal is to provide you with the most accurate and usable documentation possible; if you discover errors, please let us know. Barco software products are the property of Barco. They are distributed under copyright by Barco N.V. or Barco, Inc.
7. Important information Connectors DMS-59 Connectivity One DMS-59-to-DVI adaptor included Supported resolutions DirectX support 2560x1600 DisplayPort, 1920x1200 DVI/Analog OpenGL support OpenGL 4.0 OpenCL support Approvals and compliance OpenCL 1.0 FCC Part 15 Class B, CE EN 55022 Limit B, EN 55024, UL-60950-1, BMSI CNS, CISPR- 22/24, IEC609050-1, VCCI, CSA C22.
7. Important information Graphics memory 512 MB DDR3 Memory interface Memory bandwidth 64-bit Pixel depth 32-bit pixels (supports 8-bit and 10-bit per color channel) Electrical standard Dual-link DVI complying to v1.0, DisplayPort complying to v1.1a Connectors 1- DVI-I, 1- DisplayPort Connectivity One DisplayPort to Single-Link DVI-I dongle included Up to 6MP color and 10MP grayscale Supported resolutions DirectX support 14.4 GB/s Microsoft® DirectX v11.0, Vertex Shader 5.0, Pixel Shader 5.
7. Important information Form factor 163 mm (L) x 97 mm (H) single PCIe slot wide Operating system Windows 7 - 32/64-bit, Windows 8.1 – 32/64-bit Platforms Intel® and AMD architectures ATI FirePro Graphics accelerator Graphics memory Memory interface Memory bandwidth 1 GB GDDR5 128-bit 64 GB/s Pixel depth 32-bit pixels (supports 8-bit and 10-bit per color channel) Electrical standard Dual-link DVI complying to v1.0, DisplayPort complying to v1.
7. Important information Approvals and compliance Operating temperature FCC Part 15 Class B, CE EN 55022 Limit B, EN 55024, UL-60950-1, BMSI CNS, CISPR- 22/24, IEC609050-1, VCCI, CSA C22.2, EU RoHS directive (2002/95/EC), Certificate of Information & Communication Equipment (Republic of Korea) 0° to 60°C (32° to 140° F) MXRT-5450 Product acronym MXRT-5450 Bus compatibility PCIe Gen2 x16 Power consumption 72 Watt Form factor Operating system 230.53 mm (L) x 98.
7. Important information Electrical standard Dual-link DVI complying to v1.0, DisplayPort complying to v1.2 Connectors 1- DVI-I, 2- DisplayPort Connectivity Supported resolutions DirectX support Two DisplayPort to Single-Link DVI-I dongles included DisplayPort to Dual-Link DVI-I dongle available from Barco; Part Number K9305104 Up to 6MP color and 10MP grayscale Microsoft® DirectX v11.1, Vertex Shader 5.0, Pixel Shader 5.0 OpenGL support OpenGL 4.2 OpenCL support OpenCL 1.
7. Important information Form factor Operating system 281.29 mm (L) x 98.53 mm (H) single PCIe slot wide Windows XP - 32/64-bit, Windows 7 - 32/64-bit, Windows 8.1 – 32/64-bit Platforms Graphics accelerator Intel® and AMD architectures ATI FirePro Graphics memory 2 GB GDDR5 Memory interface Memory bandwidth 256-bit 128 GB/s Pixel depth 32-bit pixels (supports 8-bit and 10-bit per color channel) Electrical standard Dual-link DVI complying to v1.0, DisplayPort complying to v1.
7. Important information Approvals and compliance Operating temperature 48 FCC Part 15 Class B, CE EN 55022 Limit B, EN 55024, UL-60950-1, BMSI CNS, CISPR- 22/24, IEC609050-1, VCCI, CSA C22.