User guide

4. Driver and software installation
• After you have installed the Barco Display Controller(s) for your Barco Display System in your system
for the first time.
• After you have reinstalled or upgraded your operating system.
• When you upgrade to a newer version of the MXRT driver and software.
You do not need to manually uninstall an existing driver before updating to the current version. The
Barco Product Installation Wizard will detect any prior installations and start the uninstallation process
automatically if necessary.
If you have a previous version of Conference CloneView application installed in the system, you need
to terminate the application prior to installing the new version. To do so, bring up Barco Clone Dis-
play(s) configuration window, select Stop Cloning, and close the window.
When there is a non-Barco board in the system, we recommend that you first install the driver for the
non-Barco board before installing the Barco driver.
After each driver installation, you should reboot the system before proceeding with the installation of
another driver.
Installation procedure
The following will guide you through the installation procedure:
1. Start your system. If you have a fresh OS installation, or you have uninstalled an existing driver, the
OS may automatically install an inbox driver from the Windows 7 driver store, either an AMD driver or
a standard VGA driver, for the Barco Display Controller(s).
If this occurs, the OS prompts you to restart your computer, click Yes to allow the automatic driver
installation to complete and reboot the system.
2. Launch the Barco Product Installation Wizard. The installation Wizard should start automatically when
you insert the Barco Display System Installation DVD into your computer’s DVD drive. If the installation
does not start, in the "auto play" window, click Run setup.exe.
3. To accept the installation of default software components, click on Next. To custom select software
components, click on Select Software Components and the following screen wi
ll appear, allowing
selection of individual components.
Image 4-1
Software com ponent options for custom installation
24 K5905271 DISPLAY CONTROLLER 11/09/2014