Specifications

rum Wa

5. PCB Manual Test Mode

- PCB and other electronic parts will be tested without water supply whether they are normal or not.

1) Process

: Press power button -> Press "SPIN" button 3 times with pressing "WASH" button -> "X X X" will be

shown on LED display-> Whenever pressing "Signal" button 1 time, below process will be occurred.

- "X X X' : Program version display

2) More details

- When turn on 'LOCK' signal, all process is conducting normaly.

- In this case, BLDC Motor is not tested. In order to test it, select spin or rinse.

Step Display Details

1 L_C Door Lock Close

2 run 001 Running times count

3E50 E5 Error count

4E60 E6 Error count

5E70 E7 Error count

6E80 E8 Error count

7F Do not use

8H Hot Valve on

9C Cold Valve on

10 P Pre Wash Valve on

11 d Do not use

12 b Bleach Valve

13 dr Drainage pump on

14 L_O Door Lock Open