APPLI A NC E S FOR L I V I NG ADW7003 X/W OPERATION MANUAL
Congratulations, you are now the proud owner of an ARTUSI cooking appliance. Thank you for purchasing ARTUSI and welcome to the ARTUSI Family. This instruction manual has been specially created to inform you of the full range of features your ARTUSI appliance has to offer and serves as an introduction to getting the very best out of your ARTUSI appliance. We present detailed information on each of the features your ARTUSI appliance consists of.
Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS ................................................................................................ 1 1.1. General Safety Warnings ..............................................................................................1 1.2. Installation Warnings .....................................................................................................1 1.3. During Use................................................................................................................
1. SAFETY INSTRUCTIONS 1.1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. • Packaging materials protect your machine from any damage that might occur during transportation.
1.2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void. Check that the indoor electrical fuse system is connected in line with safety regulations. All electrical connections must match the values on the plate.
• it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher. Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse. Do not drink water from the machine. Due to the danger of explosion, do not place any chemical dissolving agents into the machine’s washing section.
be performed by an authorised service company, otherwise the warranty will be void. Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap. Operation at a low voltage will cause a decline in performance levels. For safety, disconnect the plug once a program has finished. To avoid an electric shock, do not unplug the machine with wet hands. Pull the plug to disconnect the machine from the mains, never pull on the cord.
CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
2. INSTALLATION 2.1. Machine positioning When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C. Read all warnings located on the packaging before removing the packaging and positioning the machine. Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
WARNING: After removing the top panel of your dishwasher, the machine should be placed in a space of the dimensions shown in the figure below. 2.5. Electrical connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current.
3. TECHNICAL SPECIFICATIONS 3.2. Technical specifications 1 Capacity 15 place settings Dimensions Height Width Depth 840(mm) 598(mm) 598(mm) Net weight 53 kg Operating voltage / frequency 220-240V 50 Hz, 11 2 10 3 4 5 6 9 7 8 12 3.1. General appearance 1. Worktop 2. Upper basket with racks 3. Upper spray arm 4. Lower basket 5. Lower spray arm 6. Filters 7. Rating plate 8. Control panel 9. Detergent and rinse-aid dispenser 10. Upper basket track latch 11. Upper Cutlery Basket 12.
When you stop using combined detergents, make sure that rinse aid settings are set to correct level. 4. BEFORE USING THE APPLIANCE 4 . 4 . Rinse-aid usage Rinse-aid makes dishes sparkle and helps them to dry without spotting. Rinse-aid is required for stain-free utensils and clear glasses. Use only rinse-aid for domestic dishwashers. 4.1. Detergent usage Only use detergents specifically designed for domestic dishwashers.
In order to change the rinse aid level, follow the below steps before turning on the machine: • Push the programme button and hold it down. • Turn on the machine. • Hold down the programme button until “rA” disappears from the display. Rinse aid set follows water hardness set. • The machine will display the current setting. • Set the level by pushing the programme (+) and delay (-) buttons. • Switch off the machine to save the setting. The factory setting is “4”.
Upper Basket Height adjustment Turn the Rail Stop Clips, at the ends of the rails, to the sides to open them (as shown in the image below), then pull out and remove the basket. Change the position of the wheels, then reinstall the basket to the rail, making sure to close the Rail Stop Clips. When the upper basket is in the higher position, large items such as pans can be placed on the lower basket.
Four Folding Racks (15 pc) The folding racks allow easier placement of larger items, such as pots and pans. Each section can be folded separately. The racks can be raised up, or folded down, as shown in the images. 1 basket, after washing. The upper cutlery basket is composed of two pieces that can be separately removed. Remove the left or right section of the cutlery basket in order to obtain more space for items in the upper basket.
5.2.
6. PROGRAMME TABLE Programme Duration (min) Description Mini 14’ 14 Fast programme intended for recently used dishes which are lightly soiled. Suitable for 4 place settings. Quick 30’ 30 Quick wash programme for lightly soiled dishes. Eco 138 Standard programme for dishes which are used daily but are not heavily soiled. Dual Pro Wash 113 For both lightly soiled delicate glassware and heavily soiled crockery at the same time.
7. THE CONTROL PANEL Starting the Machine and Selecting a Programme Press the Power On/Off button (1), the display (9) will show the most recently selected programme. 6 7 8 3 4 5 Select the programme most suitable for your dishes using the Programme button (4). P Additional functions (3, 5, 6, 7, 8). 1 NOTE: Press the Half Load button (3) to select the area of the dishwasher containing dishes to be washed. You can select both baskets, the upper basket only, or the lower basket only.
corresponding to the status of the programme in operation. While the Drying symbol is displayed, the machine will remain silent for 45 to 50 minutes. The Remaining Time Display shows the programme durations and the time remaining of the programme in operation. • The display will count down from 3 to 1. When it finishes, the time remaining for cancellation will show on the display. The water discharge process will start when the remaining time finishes and the End symbol will illuminate.
8. CLEANING AND MAINTENANCE the filters. Replace the filter insert, and rotate it clockwise (4). • Never use your Dishwasher without a filter. Cleaning your Dishwasher is important to maintain the machine’s service life. Oil and lime may build up in your Dishwasher over time. If this occurs: • Fill the detergent compartment but do not load any dishes. Select a programme which runs at high temperature and run the Dishwasher empty.
9. TROUBLESHOOTING FAULT The programme does not start. Water remains inside the machine. Machine stops during washing. Shaking and hitting noises are heard during a wash operation. POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Your Dishwasher is not switched on. Switch your Dishwasher on by pressing the On/Off button. Fuse blown. Check your indoor fuses. Water inlet tap is closed. Turn on the water inlet tap. Your Dishwasher door is open.
FAULT Whitish stains remains on dishes. POSSIBLE CAUSE TROUBLESHOOTING Not enough detergent used. Use the correct amount of detergent, as instructed in the programme table. Rinse aid dosage and/or water softener setting set too low. Increase rinse aid and/or water softener level. High water hardness level. Increase water softerner level. Drying option is not selected. Select a programme with a drying option. Rinse aid dosage set too low. Increase rinse aid dosage setting.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Make sure the water inlet tap is open and water is flowing F5 Separate the inlet hose from the tap and clean the filter of the hose. Insufficient water Contact for service if the error continues. F3 Continuous water input Close the tap and contact for service. Water discharge hose and filters may be clogged. F2 Inability to discharge water Cancel the program. If the error continues, contact for service.
Warranty Card Worldwide Appliances Pty Limited A.B.N. 45868077422 Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 694 583 WARRANTY REGISTRATION Your ongoing satisfaction with your artusi product is important to us. We ask that you complete the enclosed Warranty Registration Card and return it to us so that we have a record of the artusi product purchased by you.
Warranty Card continued 4. Time for Claim under the Warranty You must make any claim under this Warranty within twenty eight (28) days after the occurrence of an event which gives rise to a claim pursuant to the Warranty, by booking a service call on the telephone number below. 5. Proof of Purchase Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect of an artusi product. 6.
DISCLAIMER Worldwide Appliances PTY LTD, trading as ARTUSI, is continually seeking ways to improve the design specifications, aesthetics and production techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product.
