Manual
Table Of Contents
- part i INTRODUCTION
- 1 GENERAL INFORMATION
- 1.1 Introduction
- 1.2 Product Type Numbers
- 1.3 Abbreviations
- 2 Physical organisation
- 2.1 Configurations
- 3 System Description
- 3.1 Introduction / Overview
- 3.2 Transmitters / Modulators
- 3.3 Monitors / Transmitter Control
- 3.4 Power Systems
- 3.5 Remote control system
- 3.6 Remote Maintenance Monitoring (RMM)
- 3.7 RMM Access
- 3.8 Local Keyboard/Display Functions
- 3.9 Document structure
- 4 Technical Specifications
- 4.1 Signal Requirements
- 4.2 Environmental characteristics
- 4.3 EMV-charakteristics
- 4.4 Mechanical characteristics
- 4.5 Power supply
- 5 Electrical installation
- 5.1 Marker beacon cabinet
- 5.2 Tower equipment
- 6 Antenna
- 6.1 Antenna NM 3561 / NM 3562 For Ils Marker Beacon
©1999 Navia Aviation AS 21464-5
USER MANUALNORMARC 7050
MARKER BEACON
4-3
Technical Specifications
4.2 Environmental characteristics
4.3 EMV-charakteristics
4.4 Mechanical characteristics
Data Transmission Medium 2-wire line, 600 ohm
Data modulation S
ERIAL, FSK
Transmitter level -10
DBM ± 2 DB
Receiver dynamic range -10
DBM... -34 DBM OR RS232
or
RS-232 interface in both Marker Beacon and remote control
Operating temperature -40
TO +55 ºC
(main cabinet except
display)
-10
TO +55 ºC
(display, remote con-
trol and slave panel)
Storage temperature -40
TO +60 ºC
H
UMIDITY 95% TO +35 °C
DECREASING LINEARLY
TO 60% AT +55 °C
V
IBRATION 0.15MM OR 19.6M/S2 (2G)
VERTICAL,10Hz to
500Hz
G
ENERAL SPECIFICATIONS FOR EMC ETS 300 339
EN50081-1 (emmission)
EN50082-2 (immunity)
EN61000-3-2 (harmonic current emmission)
EN61000-3-3 (voltage fluctuations and flicker)
S
PURIOUS AND HARMONICS CISPR 22
S
AFETY EN 60950
Dimensions (hxwxd):
MB
CABINET 267 X 450 X 343 MM
REMOTE CONTROL 71 X 132 X 200 MM
SLAVE PANELS 51 X 132 X 200 MM
The MB rack is wall mounted. The remote control and slave panel fit a 19" shelf.