User's Manual

Chapter 5 Quick Setup
ISG50 User’s Guide
82
5.5.4 VPN Advanced Wizard - Scenario
Click the Advanced radio button as shown in Figure 52 on page 77 to display the following screen.
Figure 57 VPN Advanced Wizard: Scenario
Rule Name: Type the name used to identify this VPN connection (and VPN gateway). You may use
1-31 alphanumeric characters, underscores (_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Select the scenario that best describes your intended VPN connection. The figure on the left of the
screen changes to match the scenario you select.
• Site-to-site - Choose this if the remote IPSec device has a static IP address or a domain name.
This ISG50 can initiate the VPN tunnel.
• Site-to-site with Dynamic Peer - Choose this if the remote IPSec device has a dynamic IP
address. Only the remote IPSec device can initiate the VPN tunnel.
• Remote Access (Server Role) - Choose this to allow incoming connections from IPSec VPN clients.
The clients have dynamic IP addresses and are also known as dial-in users. Only the clients can
initiate the VPN tunnel.
• Remote Access (Client Role) - Choose this to connect to an IPSec server. This ISG50 is the client
(dial-in user) and can initiate the VPN tunnel.