User's Manual

Chapter 53 Log and Report
ISG50 User’s Guide
713
53.3.3 Edit Log on USB Storage Setting
The Edit Log on USB Storage Setting screen controls the detailed settings for saving logs to a
connected USB storage device. Go to the Log Setting Summary screen (see Section 53.3.1 on
page 708, and click the USB storage Edit icon.
Figure 484 Configuration > Log & Report > Log Setting > Edit (USB Storage)
The following table describes the labels in this screen.
Table 286 Configuration > Log & Report > Log Setting > Edit (USB Storage)
LABEL DESCRIPTION
Duplicate logs to
USB storage (if
ready)
Select this to have the ISG50 save a copy of its system logs to a connected USB storage
device. Use the Active Log section to specify what kinds of messages to include.
Active Log
Selection Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and
alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
# This field is a sequential value, and it is not associated with a specific entry.
Log Category This field displays each category of messages. The Default category includes debugging
messages generated by open source software.