User's Manual

Chapter 4 Installation Setup Wizard

ISG50 User’s Guide

Note: Enter the Internet access information exactly as your ISP gave it to you.

Figure 36 Internet Access: Step 1

• I have two ISPs: Select this option to configure two Internet connections. Leave it cleared to

configure just one. This option appears when you are configuring the first WAN interface.

• Encapsulation: Choose the Ethernet option when the WAN port is used as a regular Ethernet.

Otherwise, choose PPP over Ethernet or PPTP for a dial-up connection according to the

information from your ISP.

• WAN Interface: This is the interface you are configuring for Internet access.

• Zone: This is the security zone to which this interface and Internet connection belong.

• IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP address.

Select Static if the ISP assigned a fixed IP address.

4.1.2 Internet Access: Ethernet

This screen is read-only if you set the previous screen’s IP Address Assignment field to Auto.

Use this screen to configure your IP address settings.