User's Manual

Chapter 30 Outbound Trunk Group
ISG50 User’s Guide
500
Figure 322 BRI Trunk - Add/Edit: Direct
Each field is described in the following table.
Table 173 BRI Trunk Add/Edit
LABEL DESCRIPTION
General Settings
Trunk Name Type the name of this BRI interface. This field can be 1-30 alphanumeric characters (A-Z,
a-z, 0-9) and underscores (_). The first character must be a letter.
Description
Type the description for this BRI interface. This field can be 0-63 alphanumeric characters
(A-Z, a-z, 0-9), underscores (_), hyphens (-) and spaces. 0 means this field can be left
blank.
Option
Specify the service type for this BRI trunk.
Select DDI/DID (Direct Dialing In) when you want people to use a “direct number” to
dial an outgoing call. You can also specify a prefix number in the caller number that might
be required by your telephone company for outgoing calls using DDI/DID. See DDI
(Direct Dial In) on page 479 for more information.
Select AA (Auto-Attendant) to switch all calls coming through this interface to the Auto-
Attendant system first. See Section 31.1 on page 503 for more information.
Select Direct to forward all calls coming through this interface from trusted callers to
extensions. See Calling Directly to an Extension on page 480 for more information.
Select MSN (Multiple Subscribe Number) to switch all the calls to MSNs coming through
this interface to the Auto-Attendant system first. See Using Multiple ISDN Numbers on
page 478 for more information.
Directory Number
Enter your ISDN number registered to your telephone company. This number is used for
the caller number when you make an outgoing call through the trunk from the extension
which cannot be found in the DDI mapping table. This field can be 3-20 digits in length.