User's Manual

Chapter 29 Extension Management
ISG50 User’s Guide
458
29.2 The Authority Group Screen
Use this screen to set up authority groups on the ISG50. To access this screen, click Configuration
> PBX > Extension Management > Authority Group.
Figure 294 Configuration > PBX > Extension Management > Authority Group
Each field is described in the following table.
29.2.1 The Add Authority Group Screen
Use the Add Authority Group screen to create a new authority group. Click the Add icon in the
Authority Group screen to view the screen as shown.
Note: Only the Add Authority Group screen is shown in the following figure.
Figure 295 Add Authority Group
Table 152 Configuration > PBX > Extension Management > Authority Group
LABEL DESCRIPTION
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Remove To remove an entry, select it and click Remove. The ISG50 confirms you want to remove
it before doing so.
# This field is a sequential value, and it is not associated with a specific entry.
Name
This is the name of the authority group.
Group ID This is the authority group’s identification number.
Description This field displays the description for this authority group.