User's Manual

Chapter 7 General Tutorials
ISG50 User’s Guide
128
Figure 103 Configuration > Network > NAT > Add
7.9.3 Set Up a Firewall Rule For H.323
The default firewall rule for WAN-to-LAN traffic drops all traffic. Here is how to configure a firewall
rule to allow H.323 (TCP port 1720) traffic received on the WAN_IP-for-H323 IP address to go to
LAN1 IP address 192.168.1.56.
1 Click Configuration > Firewall > Add.
In the From field select WAN.
In the To field select LAN1.
Configure a name for the rule (WAN-to-LAN_H323 here).
Set the Destination to the H.323 device’s LAN1 IP address object (LAN_H323). LAN_H323 is
the destination because the ISG50 applies NAT to traffic before applying the firewall rule.
Set the Service to H.323.
Click OK.