User's Manual

Chapter 7 LAN Setup
AMG1202-T10A User’s Guide
88
The following table describes the labels in this screen.
7.3 The DHCP Setup Screen
Use this screen to configure the DNS server information that the ZyXEL Device sends to the DHCP
client devices on the LAN. Click Network > DHCP Setup to open this screen.
Figure 38 Network > LAN > DHCP Setup
Table 22 Network > LAN > IP: Advanced Setup
LABEL DESCRIPTION
RIP & Multicast Setup
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports IGMP-
v1, IGMP-v2 and IGMP-v3. Select None to disable it.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.