User's Manual

Chapter 4 Tutorials
AMG1202-T10A User’s Guide
51
4.5.2 Full Feature NAT + One-to-One Mapping
Use this setting if your applications must use fixed public IP addresses and the applications can be
initiated either from the Intranet computers (A and B) or the Internet computer (C). For example,
gaming application.
To configure this setting:
1 Click Network > NAT.
2 Select Active Network Address Translation(NAT) and Full Feature in the General screen.
Click Apply.
3 Click the Address Mapping tab, click the Edit icon on a new rule.
4 Configure two rules for the one-to-one mappings:
• Rule 1 (This maps the public IP address 172.16.1.253 to the private IP address 192.168.1.2)
Type: One-to-One
Local Start IP: 192.168.1.2
Global Start IP: 172.16.1.253
• Rule 2 (This maps the public IP address 172.16.1.254 to the private IP address 192.168.1.3)
Type: One-to-One
Local Start IP: 192.168.1.3
A
B
IP-1
C