User's Manual

Chapter 20 Tools
AMG1202-T10A User’s Guide
208
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the ZyXEL
Device to its factory defaults. The following warning screen appears.
Figure 108 Reset Warning Message
Figure 109 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your ZyXEL
Device. Refer to Section 1.7 on page 25 for more information on the RESET button.
20.4 The Restart Screen
System restart allows you to reboot the ZyXEL Device remotely without turning the power off. You
may need to do this if the ZyXEL Device hangs, for example.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This does
not affect the ZyXEL Device's configuration.
Figure 110 Maintenance > Tools >Restart