User's Manual

P-660R-T Series User’s Guide
Chapter 12 Maintenance 116
Figure 55 Firmware Upgrade
The following table describes the labels in this screen.
Table 31 Firmware Upgrade
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Reset Click this button to clear all user-entered configuration information and return the
Prestige to its factory defaults. Refer to
Section 2.2 on page 41.
Note: Do not turn off the Prestige while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the Prestige again.
The Prestige automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 56 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.