User`s guide

P-793H v2 Support Notes

Source Port

Enter the source port number of the traffic.

Protocol ID

Enter the protocol number for the traffic. 1 for ICMP, 6 for TCP or 17 for

UDP

After configuration BWM, you can check current bandwidth of the configured

traffic in Web Configurator, Advanced Setup, Advanced -> Bandwidth

MGMT-> Monitor.

18. How to configure packet filter on P-793H v2?

The P-793H v2 allows you to configure up to twelve filter sets with six rules in

each set, for a total of 72 filter rules in the system. You can apply up to four

filter sets to a particular port to block multiple types of packets. With each

filter set having up to six rules, you can have a maximum of 24 rules active

for a single port.

The packet filter on P-793H v2 is configured in SMT menu 21.1.

19. How could I configure triple play on P-793H v2?

The common triple play scenario is as follows:

VOIP Telephone

Port1 PVC1

0/32

Port1

VOIP Server

Video Client

Port2 PVC2

0/34

Port2

IPTV Server

Clients surfing

Port3 PVC3

0/55

Port3

Internet

Other clients

Port4 PVC4

1/32

Port4

Others

P-793H v2 IP-DSLAM VL-Switch

CPE

Access Network ISP

Triple Play is a port-based policy to forward packets from different LAN port to

different PVCs, thus we could assign different parameters to the PVC (CBR,

UBR, VBR-RT, VBR-nRT) to guarantee different applications.

We could configure triple play on P-793H v2 in SMT menu 24.8 as below:

8021Q groupset [groupid] [vid] [LAN] [index]|[PVC|WLAN|PWR|USB]

[tagged/untagged]