User's Manual

Chapter 33 System Information & Diagnosis
P-793H User’s Guide
321
Figure 210 Menu 24.4: System Maintenance - Diagnostic
The following table describes the labels in this screen.
Menu 24.4 - System Maintenance - Diagnostic
xDSL System
1. Reset xDSL 21. Reboot System
22. Command Mode
TCP/IP
12. Ping Host
Enter Menu Selection Number:
Host IP Address= N/A
Table 123 Menu 24.4: System Maintenance - Diagnostic
FIELD DESCRIPTION
Reset xDSL Enter 1 to reset the DSL connection on the WAN port.
Ping Host Enter 12 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
Reboot System Enter 11 to reboot the ZyXEL Device.
Command Mode Enter 22 to go to the Command Interpreter (CI) for further diagnosis. You can
also enter the CI using menu 24.8.
Host IP Address If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.