User Manual

ManualsBrandsZTE ManualsModemsMF65

ZTE MF65

Let’s go

Getting started with your device.

2 4 5 6 73 8

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

Getting to Know Your Device

Appearance

The following gure is only for your reference. The actual product may be

different.

1. LED Indicators

2. Power Button

3. WPS Button

4. Micro USB Port

5. (U)SIM Card Slot

6. microSD Card Slot

NOTE: microSD logo

is a trademark of SD Card Association.

Indicators

Indicator Status Description

Network

Red solid

Error status. Not registered to the mobile

network, no (U)SIM card inserted or no

network service available.

Green solid Registered to the mobile network.

Green blinking

Connected to the mobile network and data is

being transferred.

Indicator Status Description

Wi-Fi

Blue solid Wi-Fi is active.

Blue blinking WPS is active.

LED light off Wi-Fi is off or your device is in sleep mode.

Battery

Red solid/

blinking

The battery is low. Please charge the battery.

Green blinking The battery is being charged.

Green solid The battery level is middle or high.

LED light off

Your device is in standby mode and not being

charged, or the battery is not inserted.

Connection Scenario

Your device supports two methods to connect to the Internet and supports

multi-clients for surng on the Internet at the same time. The following gure

is only for your reference.

• 3G Mode: Use your (U)SIM card to access the Internet.

• AP Station Mode: Your device will connect to other WLAN device

(hotspot device, wireless router, etc.) via Wi-Fi to access the Internet.

The WLAN device has already connected to the Internet.

NOTE:

The subnets of your device and other WLAN device must be different.

Installing Your Device

1. Slide the back cover and remove it

2. Insert the (U)SIM card.

WARNING: Do not use nonstandard or incompatible SIM card. Otherwise

your modem may be damaged.

3. Insert the microSD card if necessary.

4. Insert the battery.

5. Close the back cover.

NOTE:

Please check the label on your device to get the default SSID.

4. Input the password, and then click Connect.

NOTE:

You may need to input the password for Wi-Fi connection. Please check the

label on your device to get the default.

5. Wait a moment, and then the client will connect to your device

successfully.

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in

any form or by any means, electronic or mechanical, including photocopying and

microlm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modications on print errors or update specications without prior notice.

Version No. : R1.1

Edition Time : 2.5.2013

NOTE:

Do not use the device in an enclosed environment or where heat dissipation is

poor. Prolonged work in such space may cause excessive heat and raise ambient

temperature, which may lead to automatic shutdown of the device for your safety.

In the case of such event, cool the device in a well-ventilated place before turning

on for normal use.

Via USB Cable

1. Connect to the device.

2. Power on your device.

3. The OS detects and recognizes new hardware and finishes the

installation automatically.

NOTE:

If the system does not launch installation automatically, you can run the

installation program in path of My Computer > ZTEMODEM.

4. Wait a moment, and then the client will connect to your device

successfully.

Accessing the Internet

3G Mode

After the client connected to your device successfully, you can access the

Internet in the Automatic or Manual mode. The default mode is Automatic.

Mode Operations

Automatic

Your device will connect to the Internet automatically, and

your clients can surf on the Internet directly.

Manual

> 3G Settings > Network Select > WAN Connection

Mode > Manual, and then click Connect or Disconnect.

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search for the available

wireless networks.

NOTE: Please set the client to obtain an IP address automatically referring to

the chapter “Conguring your PC”, and then the client will get an IP address

like “192.168.0.101”.

3. Select the SSID of your device, and then click Connect.

Summary of content (2 pages)

PAGE 1
Getting to Know Your Device Indicator Wi-Fi Appearance ZTE MF65 The following figure is only for your reference. The actual product may be different. Let’s go Battery Getting started with your device. LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
PAGE 2
NOTE: If you want to modify the detailed parameters of your device, please log in the webGUI configuration page by visiting http://192.168.0.1 or http://m.home. The default password is admin. 2. Right-click Wireless Network Connection, and then select Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration. • • AP Station Mode 1. Log in the webGUI configuration page. 2. Select Settings > AP Setting. 3.