User's Manual

Introduction

Control Panel Display

P1056468-002 7/3/13

Set the Head-Close Action

Set the action for the printer to take when you close the printhead.

See Head-Close Action on page 92 for more information.

Set the Backfeed Sequence

This parameter sets when label backfeed occurs after a label is

removed in some print modes. It has no effect in Rewind mode.

This setting is superseded by ~JS when received as part of a label

format.

See Backfeed Sequence on page 87 for more information.

Adjust the Label Top Position

This parameter adjusts the print position vertically on the label.

Positive numbers adjust the label top position farther down the

label (away from the printhead) by the specified number of dots.

Negative numbers adjust the position up the label (toward the

printhead).

See Label Top Position on page 87 for more information.

Adjust the Label Left Position

If necessary, shift the print position horizontally on the label.

Positive numbers move the left edge of the image toward the

center of the label by the number of dots selected, while negative

numbers move the left edge of the image toward the left edge of

the label.

See Label Left Position on page 87 for more information.

Set the Head Test Count*

The printer periodically performs a test of the printhead

functionality. This parameter establishes how many labels are

printed between these internal tests.

See Head Test Count on page 87 for more information.