Owner`s manual

Zaxcom TRX900 and TRX900AA Recording Wireless™ Owner’s Manual
Chapter 2
17
Specialized Function Menu Pages
To access the specialized function menu:
1. Turn off the Receiver
2. Hold down the menu key while powering up the receiver.
Backlight Mode Selection
The backlight mode selection page controls the backlight on the LCD display.
Transmission Format Selection
The transmission format page displays the current format selection and allows you to select the
transmission format being used. If you do not have the transmission format set correctly, you will not be
able to receive any audio from the transmitter.
You can select between US mono, US Stereo, and European mode. When you change modes, you must
power cycle the receiver (turn the receiver off, then back on) before the changes take effect.
Transmitter reference
o US M
ono Format
o US Stereo Format
o European Format
Tes t Ton e Page
The test tone page generates a 1 kHz test tone. The tone amplitude is +0 dB. This is 20 dB less than full
scale. However, you can change the tone amplitude using the Inc and Dec keys.
When you exit the test tone page, the tone is automatically disabled.
ID Code 0 Page
This code should be set to 000 for normal operation.
Transmitter reference
o ID
Code 0 Page
ID Code 1 Page
This code should be set to 000 for normal operation.
Transmitter reference
o ID
Code 1 Page