User Manual

INTRODUCTION SKYVIEW is an enclosed FPV headset specially designed to work with TYPHOON H and TORNADO H920. SKYVIEW lets you focus on creating the best possible shot. As you operate the camera you see exactly what the drone sees, just as if you were on board. SKYVIEW also works with any device that has an HDMI output. Connect to the device, put on the headset, and you are immersed in your own virtual reality experience, ideal for many exciting applications such as games and movies.
01 Head Strap 02 USB Port 03 Power Button
OVERVIEW
01 03 04
02
07
06
V1.0
04 Power Indicator LED 05 HDMI Port 06 Earphone Port 07 Screen
User Manual
Any information below might be changed due to the software update. For the latest documents, please check the official website.
*
05
CHARGING STEP 1) Find the USB port on the right side of the SKYVIEW. STEP 2) Plug in the USB cable, the solid red Power Indicator indicates the SKYVIEW is being charged. When the charging completes, the Power Indicator will be solid green. NOTICE: After the SKYVIEW is fully charged, the charging process will stop automatically as a safety precaution.
USB
HDMI
HDMI
7.91x7.44x4.8 in (201*189*122mm) 16.31oz (462.5g) Panasonic® 3.7V 2900mAh Li-ion battery TYPHOON H (with ST16), TORNADO H920 (with ST24S) and HDMI video output devices
SPECIFICATIONS
Dimensions: Weight: Battery: Compatible Devices:
5''HD 720x1280 3.7V 0.85A 180 min
Display Screen: Resolution: Rated Voltage: Rated Current: Working Period:
CUSTOMER SERVICE Manufacturer: Yuneec International (China) Co., Ltd. Production Address: East Zhengwei Road No.388, Jinxi Town, Kunshan City, Jiangsu Province Distributor: CN: Youyu (Shanghai) Digital Technology Co.,Ltd. US: Yuneec USA Inc. Address: 5555 Ontario Mills Parkway, Ontario, CA91764, USA 1 855 2848888 Phone: [phone] EU: Yuneec Europe GmbH Address: Niklaus–Otto-Strasse 4, 24568 Kaltenkirchen, Germany.
OPERATION STEPS NOTICE: The ST16 Ground Station is taken as an example as below. STEP 1) Plug one end of the HDMI into the left port of SKYVIEW and the other end into the HDMI port besides the antenna of the ST16 Ground Station. STEP 2) Press and hold the Power Button for 3 seconds, and the SKYVIEW will boot up after you hear one long beep. When the Power Indicator lights up, the interface of the ST16 Ground Station will be displayed on the SKYVIEW 6 seconds later. NOTICE: HDMI delays for less than 20ms. NOTICE: When the SKYVIEW is powered on and displaying normally, short press the power button once and the screen will display the battery condition; short press the power button twice rapidly and the screen will display the software version (no battery condition displays). NOTICE: When no HDMI output device is connected (the screen won’t display the interface of the output device), short press the power button once and the screen will display the battery condition; short press the power button for twice rapidly and the screen will display the software version (no battery condition displays). STEP 3) To power off the SKYVIEW , press and hold the power button for 3 seconds, the power indicator will be off. NOTICE: When using the SKYVIEW, users can wear their glasses simultaneously.
www.yuneec.com