42 IN. TINE THATCHER MODEL #TD0001-42 DO NOT RETURN TO STORES PLEASE CONTACT OUR CUSTOMER SERVICE TEAM IF YOU FIND YOU ARE MISSING ANY PARTS, APART IS DEFECTIVE, OR YOU HAVE ANY OTHER QUESTIONS/CONCERNS.
>YAR‘DWOHKS 42 IN. TINE THATCHER MODEL #TD0001-42 A CAUTION FOR YOUR SAFETY READ YOUR OPERATOR’'S MANUAL COMPLETELY AND CAREFULLY BEFORE ATTEMPTING TO SET UP OR OPERATE YOUR NEW 42 IN. TINE-THATCHER. ALL OPERATORS OF THIS EQUIPMENT SHOULD READ AND UNDERSTAND ALL SAFETY RULES PRINTED ON THE MACHINE AND IN THIS OPERATOR'S MANUAL BEFORE USE.
A SAFETY INFORMATION RULES FOR SAFE OPERATION Remember any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Look for this symbol to point out CAUTION: Vehicle braking and important safety precautions. It stability may be affected with the alert! addition of an accessory an Your safety is involved. attachment. Be aware of changing conditions on slopes. Exercises caution at all mes when using power equipment. 1.
PACKAGE CONTENTS Part Description Quantity| Part Description Quantity A Tine Shriek 1 F Hitch Bracket 1 B Spring Tines 10 G Milch Arm Mount Brackets 2 c Lift Handle 1 H Milch Mount Arms 2 D Ade Bracket 1 1 Angle Bracken 4 E Wheals 2 Customer 8 Service Phone: (877) 533-5558 3 Mall:
HARDWARE CONTENTS Part Description Quantity Picture (Shown full size) o mem ©) O Lock Washer Nut 27 'fi o wmm @i o Cartilages Bolt 10 (AR NOT SHOWN FULL SIZE o Hie Pin Customer Service Phone: (877) 533-5558 Mall:
PREPARATION Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble or operate the product. Contact customer service for replacement. Estimated assembly time : 30 minutes. Tools Required for Assembly: Open-end wrench (included) Flathead screw driver (not included) Helpful Tools for Assembly: Adjustable wrench (not included) ASSEMBLY INSTRUCTIONS Fig. 1 1.
8. Tighten the bolls and noels assembled in sleep 8. Tighten the bolts and nuts assembled in step 2. Tighten the bolts and nuts assembled in step 3. Tighten the boils and noels assembled in step 5. 8. Assemble the axe bracket (D)} on the suicide of the angle brackets {1} using two hex bolts (0} and 8 mm nylon nuts (P). The ends of the axle bracket must point as shown in figure 4. Tighten and then Loosen the bolts and nuts slightly. See figure 4. 10.
OPERATION INSTRUCTIONS Regular removal of thatch is critical to the maintenance of 8 healthy lawn. Thatch is a layer of stems, drippings, runners, roots and leaves that have not decayed. Excessive thatch prevents air, water and fertilizer from reaching the roots. The DE-thaicher selectively dislodges excessive thatch from your lawn. Read these instructions io help avoid improper adjustment and operation. Proper adjustment of the tine hashish and spring tines is important for selective performance.
PART LIST AND EXPLODED VIEW Part Description Quantity ( Part Description Quantity A Ting Shield Fiat Washer 2 B Spring Tines 10 M Lock Washer 2 C Lift Handle 1 N 8 rom x 30 mm Hex Bolt 2 D Axle Bracket Hex Bolt 13 E Wheels Shylock Nut 27 F Hitch Bracket 1 Q Cotter Pin 1 G Hitch Ao Mourn Brackets Oppression Wrench 2 H Hitch Mount Arms 10.5 x 1.
