Data Sheet

480
44
1
440
3
354
361
（4）
SP2060
SP2060
Digital Speaker Processor
Advanced speaker processing performance in a compact 1U unit that is
ideal for live sound or installations.
• All of the functionality required for most speaker processing applications in a compact 1U unit.
• An impressive array of built-in functions: gain, delay, PEQ, comp, crossover, and limiter.
• All-Pass Filter precisely controls phase without affecting gain.
• Two analog inputs, six analog outputs, and two AES/EBU digital inputs.
• Original audio processing LSI provides full 24-bit, 96-kHz processing capability for outstanding sound quality with a dynamic range in
excess of 110 dB.
• Detailed programming can be accomplished using the DME Designer application software running on a personal computer.
• Ethernet port and comprehensive panel interface.
• Optimized for Yamaha Installation Series Speakers.
Rear Panel
GENERAL SPECIFICATIONS
Scene 99 (PRESET: 12, USER: 87)
Sampling frequency rate Internal : 96kHz
External: Normal rate: 44.1kHz, 48kHz (±0.1%)
Double rate: 88.2kHz, 96kHz (±0.1%)
Signal delay Less than 761μs INPUT to OUTPUT (@fs=96kHz)
Total harmonic distortion*
1
Less than 0.05%, 20Hz to 40kHz @+4dBu into 600Ω (@fs=96kHz)
Less than 0.007%, 1kHz @+22dBu into 600Ω (@fs=96kHz)
Frequency response 20Hz - 20kHz, +0.5, -1.0dB, @+4dBu into 600Ω (@fs=96kHz)
Dynamic range 106dB typ. AD+DA
Hum & noise level
(20Hz to 20kHz), Rs=150Ω
-82dBu residual noise
Crosstalk (@1kHz) -80dB input to output
Power consumption 30W
Dimensions (W x H x D) 480 x 44 x 360.2mm (18.7" x 1.75" x 14.1"), 1U
Weight 4.2kg (9.7lbs)
DIMENSIONS
unit : mm
ANALOG INPUT AND OUTPUT SPECIFICATIONS
DIGITAL INPUT SPECIFICATIONS
Terminal
Actual load
impedance
For use with
nominal
Level
Connector
Nominal
Max.
before clip
INPUT A,B 10kΩ 600Ω Lines +4dBu +24dBu XLR3-31 type*
OUTPUT 1-6 75Ω 600Ω Lines +4dBu +24dBu XLR3-32 type*
Terminal Format Data Length Level Connector
DIGITAL INPUT AES/EBU AES/EBU 24bit RS422 XLR3-31 type
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with
infinite dB/Oct attenuation.
CONFIGURATION
PROCESSING FUNCTIONS
1
3×2way
2
3×2way Link
3
2× (2way + Sub)
4
2× (2way + Sub) Link
5
2×2way + 2×Aux
6
2×2way + 2×Aux Link
7
2×3way
8
2×3way Link
9
4way + 2×Aux
10
5way + Aux
11
6way
12
MultiZone
INPUT SELECT DIGITAL/ANALOG
LEVEL −∞, −138~+10dB
DELAY 0~1300msec
EQ 8 band
TYPE=PEQ, L.SHELF (6dB/Oct,12dB/Oct),
H.SHELF (6dB/Oct,12dB/Oct), HPF, LPF
GAIN=±18dB, Q=16.0~0.1
CROSSOVER LEVEL=− ∞, −138~+10dB
• AdjustGc: 12,18,24,36 or 48dB/oct
• Butrwrth: 12,18,24,36 or 48dB/oct
• Bessel: 12,18,24,36 or 48dB/oct
• Linkwitz: 12,24 or 48dB/oct
OUTPUT POLARITY NORMAL/INVERTED
LEVEL −∞, −138~+10dB
DELAY 0~500msec
EQ 6 band
TYPE=PEQ, L.SHELF (6dB/Oct,12dB/Oct), H.SHELF (6dB/Oct,12dB/Oct),
HPF, LPF, APF 1st, APF 2nd, Horn EQ
GAIN=±18dB, Q=16.0~0.1
LIMITER THRESHOLD −54~0dB