Datasheet

LF-853D Multi-Function
SMD Rework Station
XYtronic Soldering Systems...
Serving the electronics industry since 1984
.....Shingle Springs, CA.
XYtronic-USA is pleased to
announce the arrival of the all new LF853D. This Multi-
Function SMD Rework System is designed to handle
your most challenging rework & repair jobs while saving
you work space with its unique “three in one” design.
Specializing in lead free soldering/desoldering, surface
mount devices with temperature controlled hot air.
Ships with:
• DIA100: Desoldering iron assembly with tip
• 210ESD: Soldering iron assembly with tip
• AC power cord with plug
• Hot air gun
• Accessories Included
1. 2 cleaning Brushes
2. 1 cooling strip
3. 1 probe
4. 4 nozzles
5. 2 iron holders
6. Hot air gun holder
Specifications:
Input Power:
100-120Vac 60Hz
220-240Vac 50Hz
(replacement iron 210 ESD)
Wattage:
Soldering: - 100W
Desoldering - 170W
Hot Air - 600W
Temperature Range:
SIA:150-480°C/302-896°F
DIA:300-450°C/572-842°F
Hot Air-100-480°C/212-896°F
Heating Element:
Premium Grade Ceramic
Heat-Up Time:
0-300°C≤ 30 seconds.
ESD Safe:
Zero Voltage Circuitry,
Isolated 32V
Transformer, 3 Wire Power
Ground.
Housing:
Aluminum Alloy
EMI protection
.
Temperature Adjust Lock-
Out:
Yes - by Password code
Temperature Calibration
Port:
Yes – External
Burn Resistant Cables:
Yes
– Power Cord and Solder Iron
Warranty:
12 Months (excludes
consumption items)
For additional information or
ordering assistance please
call toll free 877-700-6085 to
speak with a XYtronic
Soldering Specialist today!
The XYtronic LF-853D
Multi-function SMD Rework Station
XYtronic-USA 3869 Dividend Drive Shingle Springs, CA 95682 P:530 676-6262 F:530 676-6265 www.XYtronic-USA.com
Key Features:
Heater/Sensor Failed Detection:
If sensor circuit fails, the heater power is
shut down.
Energy Saver Mode:
If the station is left idle for 20 minutes,
the energy saver feature will
automatically engage, resetting the
temperature to 150°C from the previous
setting.
Temperature "Lock-Out" feature:
The temperature can be locked with a
password code.
ESD Safe and Spike Free
Circuitry:
The "Zero Voltage" electronic switching
design protects voltage and current
sensitive components (CMOS devices,
etc.) against damaging current and
transient voltage spikes commonly
produced by less efficient, mechanically
switched stations.
Delayed Suction:
To eliminate the problem of solder
clogging up the tip, a delayed switch
feature has been incorporated for the
unit that allows the pump to continue
sucking for 1.5 seconds after the
actuator switch is released.
Light Weight Soldering Iron:
Ergonomic mini-handle that stays cool
and prevents operator fatigue.
Hot Air Function:
600W High power heating element.
Temperature adjustable, for removing
QFP, SOP,PLCC or SOJ chips, etc.
Static Free circuit design - safe for
working with CMOs and ICs.
Sensor/Pump Failed Detection, Auto-
Cooling design. Heating element with
Auto-Protection Function.