Owner manual

Command: GOESSTAPPENDBATTERY=XXX
Description: Set the append battery flag.
Parameters: The flag can be set to either “Yes” or “No “.
Response: None.
Example: -> GOESSTAPPENDBATTERY=NO5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESSTSCANSPERXMIT?
Description: Read the number of scans to be transmitted with each transmission.
Parameters: None.
Response: An ASCII text string with the number of scans per transmission.
Example: -> GOESSTSCANSPERXMIT?5 Command sent to the XL™.
GOES ST Scans Per Xmit = 16rs Response from the XL™.
Command: GOESSTSCANSPERXMIT=XXX
Description: Set the number of scans per transmission.
Parameters: This value can range from ???-???.
Response: None.
Example: -> GOESSTSCANSPERXMIT=325 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESSTBUFFERCOUNT?
Description: Counts the number of bytes currently in the GOES self timed buffer.
Parameters: None.
Response: An ascii text string is returned with an integer number representing the buffer count
C-38 Remote Operation (Command Mode) H-5223