Assembly Instruction

Please read all instructions carefully. Do not plug the power cord into the outlet until the lamp is
fully assembled. Each part has been assigned a name as following shown.
ASSEMBLY INSTRUCTIONS:
1. Please take out all of the lamp parts from the package box.
2. Remove the socket ring that is pre-assembled on the socket.
3. Invert (as below shown direction)and place the shade on to the socket.
4. Reattach the socket ring by turning it clockwise that the socket ring will fasten the shade in
place.
5. Install the Max.40W Type A bulb( bulb not included) on to the socket, and then you can plug in to
use it.
TABLE LAMP
Assembly Instruction