Operation Manual

Milk system cleaning
- Open front panel.
- Remove mixer hose, from mixer to combi spout.
- Pull and release mixer bowl forward at lever.
The propeller of the mixer is now visible.
- Clean the propeller with a cloth.
- Dismantle two-piece mixer bowl.
- Clean both parts of mixer bowl and mixer hose under
warm running drinking water.
- Allow all parts to dry completely.
1
2
3
4
Touch
in submenu cleaning
program.
Connect milk hose to the
P&C socket and lock it by
turning it to the left.
Touch .
Milk system cleaning starts.
Duration approx. 1 minute.
Mixer rinsing
Touch in
submenu cleaning
program.
Mixer rinsing starts.
Duration approx. 30
seconds.
The machine is now ready
for use.
Manual combi spout cleaning Switch off using the ON/OFF button prior to cleaning. Unplug mains plug.
A
B
C*
- Pull the lever behind the combi spout forward.
- Remove released combi spout.
- At machines with powder hopper: Release the mixer hose.
- Reassemble combi spout in 3 parts.
- Mix 5 ml WMF special cleaning agent with or dissolve a
cleaning tablet in 0,5 l of lukewarm water.
- Place mixer hose in the cleaning solution*.
- Place all 3 parts of the combi spout in the cleaning solution.
All parts must be completely immersed in the cleaning
solution.
- After 5 hours, clean all parts thoroughly with a brush.
- Rinse all parts of combi spout and mixer hose* very
thoroughly with clear water and reassemble.
D
- Reassemble and replace combi spout.
* - Connect mixer hose onto mixer bowl.
- Replace mixer bowl until it clicks into place..
- Push release lever upward.
- Connect mixer hose onto combi spout and beneath mixer bowl.
- Close front panel.
- Connect milk hose onto combi spout.
* only at machines with powder hopper
Instructions:
Milk system cleaning
For intermediate cleaning, see “milk system cleaning” above.
Manual combi spout cleaning
Perform at least once per day.
04.2016
Foamer rinsing
Touch in
submenu cleaning
program.
Foamer rinsing starts.
Duration approx. 30
seconds.
The machine is now ready
for use.
Remove P&C socket and
lock it back on the milk
container.
The machine is now ready
for use.