Datasheet

How to extend the lifetime of your
original Weller soldering tips.
The soldering tip MUST transfer heat effec-
tively & reliably to the joint & is
therefore the
critical qualility relevent component
in the soldering process! Unprofessional
care of the tips can result in a great qualiity
decrease and costly soldering problems. To
prevent such problems and unneccesary
waste, original Weller products & tips
MUST be used at all times!
Weller irons, XP stations and Stop & Go
Safety Rests enable you to use devices in
standby mode to protect the soldering
tip & save energy. The new WSW wire
rounds off Weller‘s range of Tip Savings
Products to our valued customers!
Type WSW SAC M1 WSW SAC L0 WSW SC L0 WSW SC M1
Alloy Sn3.0Ag0.5Cu Sn3.0Ag0.5Cu Sn0.7Cu Sn0.7Cu
Temperature 217-221°C 217-221°C 227°C 227°C
Flux
J-STD 004
M1 L0 L0 M1
Flux content 3.5% 3.5% 3.5% 3.5%
Weight 500 gr 500 gr 500 gr 500 gr
Diameter Order-no. Order-no. Order-no. Order-no.
0,3 mm
T005 13 865 99 T005 13 872 99
0,5 mm
T005 13 864 99 T005 13 870 99 T005 13 880 99 T005 13 876 99
0,8 mm
T005 13 863 99 T005 13 869 99 T005 13 879 99 T005 13 875 99
1,0 mm
T005 13 862 99 T005 13 868 99 T005 13 878 99 T005 13 874 99
1,2 mm
T005 13 861 99 T005 13 867 99 T005 13 877 99 T005 13 873 99
1,6 mm
T005 13 860 99 T005 13 866 99
To guarantee maximum flexibility for all
solder applications, Weller can supply a
wide range of alloys and fluxes, as well
as various wire diameters.
Alloys
SAC alloy – tin / silver / copper ■
SC alloy – tin / copper ■
Flux
Mildly activated flux (NoClean) M1 ■
Halogen-free flux L0 ■
Diameters
0,5 mm, 0,8 mm, 1,0 mm, ■
1,2 mm, 1,6 mm
Weller‘s NEW WSW soldering wire protects the soldering tip & greatly extends lifetime!
The new WSW cored soldering wire offers revolutionary wetting properties at lower
temperatures and even on difficult surfaces. This greatly reduces the wire consumption.
The anti-leaching & anti-solder splash properties greatly increase process quality and
productivity, while decreasing costs tremendously. Solder tip lifetime can be extended
by up to 30%. Bottom line is – higher process quality can be achieved in less time
and with less tips and less wire!
NEVER FORGET: Always wet the tip, even after using it with Weller WSW wire.
Standby
Auto Off
Stop & Go Safety
Rest - Dry cleaner
Accessories
NEW WSW wire
*Tools with
Usage Sensor
Genuine
Weller
| 22 |
*Automatic Energy Saving Mode with visual process control via blue LED light ring
(light on = heater on, light off = heater off)
Process
Optimizer