Specification

WD Red
™
Learn more about WD Red hard drives
CAN ICES-3 (B) / NMB-3 (B)
Specications 1TB 750GB
Model number
1
WD10JFCX WD7500BFCX
Interface SATA 6 Gb/s SATA 6 Gb/s
Formatted capacity
2
1TB 750GB
Form factor 2.5-inch 2.5-inch
Advanced Format (AF) Yes Yes
Native command queuing Yes Yes
RoHS compliant
3
Yes Yes
Performance
Data transfer rate (max)
Interface speed
Internal transfer rate
6 Gb/s
144 MB/s
6 Gb/s
144 MB/s
Cache (MB) 16 16
Performance Class 5400 RPM Class 5400 RPM Class
Reliability/Data Integrity
Load/unload cycles
4
600,000 600,000
Non-recoverable read errors per bits read
<1 in 10
14
<1 in 10
14
MTBF (hours)
5
1,000,000 1,000,000
Limited warranty (years)
6
3 3
Power Management
12VDC ±10% (A, peak) - -
5VDC ±10% (A, peak) 1.00 1.00
Average power requirements (W)
Read/Write
Idle
Standby/Sleep
1.4
0.6
0.2
1.4
0.6
0.2
Environmental Specications
7
Temperature (°C)
Operating
8
Non-operating
0 to 65
-40 to 65
0 to 65
-40 to 65
Shock (Gs)
Operating (2 ms, read/write)
Operating (2 ms, read)
Non-operating (2 ms)
400
-
1000
400
-
1000
Acoustics (dBA)
9
Idle
Seek (average)
24
25
24
25
Physical Dimensions
Height (in./mm) 0.374/9.5 0.374/9.5
Length (in./mm) 3.94/100.2 3.94/100.2
Width (in./mm, ± .01 in.) 2.75/69.85 2.75/69.85
Weight (lb./kg, ± 10%) 0.25/0.115 0.25/0.115
1
Not all products may be available in all regions of the world.
2
As used for storage capacity, one megabyte (MB) = one million bytes, one gigabyte (GB) = one billion bytes, and one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment. As used for buffer or cache, one megabyte (MB) = 1,048,576 bytes. As used for transfer
rate or interface, megabyte per second (MB/s) = one million bytes per second, and gigabit per second (Gb/s) = one billion bits per second. Effective maximum SATA 3 Gb/s transfer rate calculated according to the Serial ATA specication published by the SATA-IO organization as of the date of this specication
sheet. Visit www.sata-io.org for details.
3
WD hard drive products manufactured and sold worldwide after June 8, 2011, meet or exceed Restriction of Hazardous Substances (RoHS) compliance requirements as mandated by the RoHS Directive 2011/65/EU.
4
Controlled unload at ambient condition.
5
Based on a typical NAS product environment under normal operating conditions.
6
The term of the limited warranty may vary by region. Visit http://support.wd.com/warranty for details.
7
No non-recoverable errors during operating tests or after non-operating tests.
8
On the base casting.
9
Sound power level.
Western Digital
3355 Michelson Drive, Suite 100
Irvine, California 92612
U.S.A.
For service and literature:
http://support.wd.com
www.wd.com
800.ASK.4WDC
(800.275.4932)
North America
800.832.4778 Spanish
+86.21.2603.7560 Asia Pacic
00800.27549338 Europe
(toll free where available)
+31.880062100 Europe/Middle East/Africa
WD Red premium support
855.55.WDRED
(855.559.3733)
North America
+800.55593733 Europe/Middle East/Africa/
Asia Pacic
Western Digital, WD, and the WD logo are registered trademarks in the U.S. and other
countries; WD Red, NASware, 3D Active Balance, and FIT Lab are trademarks of
Western Digital Technologies, Inc. in the U.S. and other countries. Other marks may
be mentioned herein that belong to other companies. Product specications subject
to change without notice.
© 2016 Western Digital Technologies, Inc. All rights reserved.
2879-800002-A05 March 2016
-3-