Instruction Booklet

9
CORDLESS CLIPPER
TROUBLESHOOTING
If your cordless clipper does not seem to be operating or
charging properly, please check the following: Check the
outlet’s current by plugging another appliance (one you know is
in proper working condition) into the outlet.
Make sure the unit is not connected to a power source that
turns itself o󰀨 when lights are turned o󰀨.
Make sure the clipper and charging contacts are clean and free
of hair or other contaminants.
Verify that the blade assembly moves freely and is mounted
properly.
The battery is a non-consumer replaceable battery. Return to
Wahl for replacement if and when necessary.
ATTACHMENTS
To attach the combs, hold comb with teeth up and snap it rmly
to the bottom of the clipper blade. (Fig. 3) For uniform cutting,
allow the clipper to cut its way through the hair. Do not force it
through at a faster rate.
CHANGING THE BLADE SET
(5 star models)
Warning! Injuries and material damage due to incorrect
handling.
f Switch the appliance off and disconnect before changing
the blade set.
1.Switch the appliance off using the on/off switch (Fig. 1b) and
disconnect.
2.Undo the screws on the blade set; remove the bottom blade and the
top blade (Fig. 5).
When assembling, the bottom blade and the top blade should be
aligned as follows:
f Set the adjustment lever to the shortest cutting length (Fig. 2
a ).