SERIES CARPETS DRY IN AS LITTLE AS 1 HOUR* LET’S GET STARTED. ECGLV1B1 CWGRV011 CWGRV021 CDCW-RPXR *Tested in quick clean mode. Results may vary.
Let’s talk safety Basic safety precautions This carpet washer is intended for household use only and NOT for commercial or industrial use. • Only use the carpet washer indoors and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the carpet washer.
• Don’t attempt to remove blockages with sharp objects as this may cause damage to your carpet washer. • Don’t use the carpet washer with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label. Do's • Always vacuum your carpets thoroughly before using the carpet washer. • Check with the manufacturer of your flooring prior to using the carpet washer. Test all carpets and rugs for colourfastness and pile distortion before full usage.
Thank you for buying the Taking care of your carpets The Rapid Power is designed to make washing carpets regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and VAX will help you take good care of them.
Standard tools included with your machine Contents Let's talk safety 2-3 Getting to know your machine 6 Getting started 7 Using your machine 8 - 11 Taking care of your machine 12 - 13 Let's talk technical 14 - 15 What to do if it goes wrong 16 Getting in touch 17 Accessories 18 Notes 19 2.
Getting to know your machine Handle Trigger (hidden) Quick cord release hook Clean water/solution tank release button Solution tank cap Clean water tank cap Clean water /solution tank Wash/Rinse dial Dirty water tank release latch Dirty water tank Hose connector port Dirty water tank release latch Cleaning mode dial Solution tube connection port Recline pedal On/Off pedal Nozzle SpinScrub brushes Technical Specification Name Rapid Power Code ECGLV1B1 Part number 1-1-138933 Voltage 220-240V ~ 50/
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE IMPORTANT: Carpets should be dry vacuumed thoroughly before washing. Test for colourfastness – Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/ upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white paper towel or cloth. If your carpet has more than one colour, check all colours.
Using your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. IMPORTANT: Your dirty water tank is fitted with a float. When the dirty water tank is full, or the floorhead is not in contact with the carpet, the float will shut off the suction on the carpet washer. You will be able to hear if this has happened as the motor noise on the machine will increase. Once the float is activated, empty the dirty water tank if full.
Using your machine Plug into the mains, press the on/off pedal to switch on. Press the recline pedal and pull the handle backwards. Squeeze the trigger to release solution and water mix. For best results apply water/solution on the forward stroke and release the trigger to pick up water/solution on the backward stroke. Follow with a slow additional dry stroke without the trigger pressed for a dryer finish.
Using your machine CAUTION: Test for colourfastness – Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/ rugs/upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white paper towel or cloth. If your carpet has more than one colour, check all colours. IMPORTANT: The carpet washer should be in the upright position when using the hose and tools; de-activating the SpinScrub brushes and brushbar.
Using your machine Press the trigger on the hose to release solution /water. Squeeze the trigger on the forward stroke, release the trigger on the backward stroke to pick up solution/water. Follow with a slow additional dry stroke without the trigger pressed for a dryer finish. To remove the tool, lift and push the tool clip over the tab at the end of the hose and pull to remove. Using rinse mode on the hose Turn the wash/rinse dial to rinse. Only water is released to remove solution residue.
Taking care of your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Emptying and cleaning the dirty water tank IMPORTANT: Always empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution stored in the tanks between uses. Lift the tank release clip and unhook from the front of the dirty water tank. Use the handle to lift and remove the dirty water tank.
Taking care of your machine Lift and hook the latch on the tank onto the lid and push down to lock into place. To re-fit, slide the dirty water tank onto the carpet washer, making sure the tabs on the tank line up with the back of the washer. Hook the tank release catch over the front of the tank and push downwards to lock the catch in place. Removing and cleaning the nozzle To replace the nozzle, hook the tabs on nozzle with the front of carpet washer and slide the nozzle into place.
Let’s talk technical CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Cleaning the SpinScrub brushes 14 Remove the tanks and lie the washer on its back exposing the SpinScrub brushes. Firmly pull the sides of the SpinScrub brushes to remove. Leave the brushes to fully dry before reassembling. Push the cover onto the clips until they click into place.
Let’s talk technical Cleaning the SpinScrub filter Remove both tanks and tilt the carpet washer so it is lying on its back. Lift the nozzle release clip to unlock the nozzle. Hold the front of the nozzle and push down to release the nozzle away from the washer, once released lift to remove. Wipe any dirt and debris from the mesh filter. IMPORTANT A blocked/dirty SpinScrub filter will cause the SpinScrub brushes to slow.
What to do if it goes wrong CAUTION: To reduce the risk of personal injury, unplug the carpet washer before performing maintenance/ troubleshooting checks. Problem Is there an accessory missing? Solution • Check the contents panel on the box to make sure the part is definitely included with this carpet washer. • The plug may not be fully pushed into the electrical socket. Why won’t the carpet washer turn on? • Check if the fuse in the plug needs replacing. Always replace with a British 13amp fuse.
Getting in touch † Registration required. Terms and conditions apply, see vax.co.uk for details.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Platinum (1.5l) 1-9-139136 Platinum (4l) 1-9-142060 Platinum Carpet Cleaning Solution deep cleans carpets and removes stubborn stains. Safe to use on wool carpets - Woolsafe approved.
Notes 19
GET IN TOUCH info@vax.co.uk vax.co.uk EU Statement of Compliance: Manufacturer/EU importer: VAX Limited, hereby on our own responsibility, declare that the ECGLV1B1, CWGRV011, CWGRV021 and CDCW-RPXR are manufactured in compliance with the following Directives: Safety: 2014/35/EU Low Voltage Directive. EMC: 2014/30/EU Electromagnetic Compatibility Directive. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
