INSTRUCTION MANUAL 10ft Solar Offset Patio Umbrella with Cover Ver.
Solar panel requires 6 to 7 hours of direct sunlight to fully charge. Pg.
NOTICE Please retain these instructions for future reference. • Firmly secure all bolts, screws and knobs before use. • Reconfirm that all bolts, screws, and knobs are secure every 90 days. • Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled. • Be aware that some parts are heavy and have sharp edges.
PARTS A UPPER CROSSBAR B LOWER CROSSBAR 1 PC D BASE COVER 1 PC G UMBRELLA H 1 PC 4| F SLEEVE 1 PC I CRANK COVER POLE 1 PC K COVER 1 PC 1 PC 1 PC J ROTATING BASE 1 PC E POLE C SOLAR PANEL 1 PC 1 PC L LIGHT 1 PC
BEFORE FIRST USE 1. Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully pull the ribs apart to free them. 2. Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together. PRODUCT ASSEMBLY 1 Place the part A upper crossbar on the part B lower crossbar. 2 Attach the part C rotating base to the crossbars with four part 1 screws and four part 2 washers.
PRODUCT ASSEMBLY 4 Slide the part F sleeve onto the pole. F 5 Insert the connector from the part G umbrella into the part K solar panel. 6 Firmly insert the umbrella onto the pole and secure it with the part 3 knob. Screw the solar panel clockwise until it locks in place.
PRODUCT ASSEMBLY 7 Insert the part H crank. Compress the handle and move the arm up. Release the handle to lock it in your desired position. Slowly turn the crank clockwise to open the canopy.
PRODUCT ASSEMBLY 8 Insert the connector under the canopy into the corresponding connector on the part L light. Screw the light clockwise until it locks in place. LIGHT SWITCH L OPERATING INSTRUCTIONS Opening Canopy 1. Compress the handle and move the arm up. 2. Release the handle to lock it in your desired position. 3. Slowly turn the crank clockwise to open the canopy. Adjusting Tilt 1. Compress the handle and move the arm up/down to adjust the tilt angle of the umbrella. 2.
OPERATING INSTRUCTIONS Rotating Canopy • Compress the pedal on the rotating base to rotate the canopy. Closing Canopy • Turn the crank counterclockwise to close the canopy. USAGE TIPS • Umbrella base weights are not included. Do not use this umbrella without umbrella base weights. • Place umbrella on a stable and level surface. • Umbrella is suitable for rain showers and light wind. • Do not use umbrella in inclement weather, such as snow, heavy rain, thunderstorms, or strong wind.
LED LIGHTS • Light switch is located under the canopy (see step 8). • Solar panel requires 6 to 7 hours of direct sunlight to fully charge. • LED lights last for 6 to 7 hours on a single charge. • For better charging efficiency, make sure lights are switched off when charging. • If lights are not working, fully charge the solar panel and try again. STORAGE 1. Close the canopy. Compress the handle and move the arm all the way down. 2. Fasten the strap around the canopy. 3. Assemble the part I cover pole.
Earn points while you shop. Join today! Give your friends 15% off their first order! For each successful referral you’ll receive 100 points. bestchoiceproducts.
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT US! Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.
